Ink Applications from Published Journals
Brief Description or Sub Heading
Here you can load what this information is or why it is important. We can add as much descriptive text here. I would like to point out that I am getting tired of trying to come up with junk to load in this section of information.
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2020
| Title | Author | Year | Ink Mentioned | Journal Citation |
|---|---|---|---|---|
| Layer Morphology and Ink Compatibility of Silver Nanoparticle Inkjet Inks for Near-Infrared Sintering | Dieter Reenaers, Wouter Marchal, Ianto Biesmans, Philippe Nivelle, Jan D’Haen and Wim Deferme | 2020 | JS-A102A, JS-B40G | Reenaers D, Marchal W, Biesmans I, Nivelle P, D’Haen J, Deferme W. Layer Morphology and Ink Compatibility of Silver Nanoparticle Inkjet Inks for Near-Infrared Sintering. Nanomaterials (Basel). 2020;10(5):892. Published 2020 May 7. doi:10.3390/nano10050892 |
| Versatile printed microheaters to enable low-power thermal control in paper diagnostics | KM Byers, LK Lin, TJ Moehling, L Stanciu, JC Linnes | 2020 | JS-B40G | Byers KM , Lin LK , Moehling TJ , Stanciu L , Linnes JC . Versatile printed microheaters to enable low-power thermal control in paper diagnostics. Analyst. 2019;145(1):184-196. doi:10.1039/c9an01546a |
| Temperature effect on all-inkjet-printed nanocomposite piezoresistive sensors for ultrasonics-based health monitoring | Pengyu Zhou, Wuxiong Cao, Yaozhong Liao, Kai Wang, Xiongbin Yang, Jianwei Yang, Yiyin Su, Lei Xu, Li-min Zhou, Zhong Zhang, Zhongqing Su | 2020 | JS-A211 | Pengyu Zhou, Wuxiong Cao, Yaozhong Liao, Kai Wang, Xiongbin Yang, Jianwei Yang, Yiyin Su, Lei Xu, Li-min Zhou, Zhong Zhang, Zhongqing Su,Temperature effect on all-inkjet-printed nanocomposite piezoresistive sensors for ultrasonics-based health monitoring, Composites Science and Technology, Volume 197, 2020, 108273, ISSN 0266-3538,https://doi.org/10.1016/j.compscitech.2020.108273. |
| Inkjet-Printed Molybdenum Disulfide and Nitrogen-Doped Graphene Active Layer High On/Off Ratio Transistors | Mohi Uddin Jewel, Mahmuda Akter Monne,Bhagyashree Mishra and Maggie Yihong Chen | 2020 | JS-B40G | Jewel, M.U.; Monne, M.A.; Mishra, B.; Chen, M.Y. Inkjet-Printed Molybdenum Disulfide and Nitrogen-Doped Graphene Active Layer High On/Off Ratio Transistors. Molecules 2020, 25, 1081. |
| Interconnections for Additively Manufactured Hybridized Printed Electronics in Harsh Environments | Clayton Neff ; Edwin Elston ; Amanda Schrand | 2020 | HPS-FG57B | Neff, C.; Elston, E.; Schrand, A. Interconnections for Additively Manufactured Hybridized Printed Electronics in Harsh Environments. Designs 2020, 4, 14. |
| Paper Substrates for Inkjet Printing of UHF RFID Antennas | Juraj Gigac, Mária Fišerová, Maroš Kováč, Monika Stankovská | 2020 | JS-B25P | Gigac, J.,Fiserova, M., Kovac, M., Stankovská, M., 2020: Paper substrates for inkjet printing of UHF RFID antennas. Wood Research 65(1): 25-36. |
| Novel gas sensing platform based on a stretchable laser-induced graphene pattern with self-heating capabilities | Li Yang, Ning Yi, Jia Zhu, Zheng Cheng, Xinyang Yin, Xueyi Zhang, Hongli Zhu, and Huanyu Cheng | 2020 | JS-A191 | Yang, L., Yi, N., Zhu, J., Cheng, Z., Yin, X., Zhang, X., Zhu, H., Cheng, H., Novel gas sensing platform based on a stretchable laser-induced graphene pattern with self-heating capabilities. J Mat Chem A 2020, 8, 6487-6500, https://doi.org/10.1039/C9TA07855J |
| Laser-induced porous graphene gas sensing platform toward the electronic nose | Ning Yi, Huanyu Cheng | 2020 | JS-A191 | Ning Yi and Huanyu Cheng “Laser-induced porous graphene gas sensing platform toward the electronic nose”, Proc. SPIE 11389, Micro- and Nanotechnology Sensors, Systems, and Applications XII, 113891E (23 April 2020); https://doi.org/10.1117/12.2559154 |
| Direct loading of blood for plasma separation and diagnostic assays on a digital microfluidic device† | Christopher Dixon, Julian Lamanna and Aaron R. Wheeler | 2020 | JS-B25P | Dixon C , Lamanna J , Wheeler AR . Direct loading of blood for plasma separation and diagnostic assays on a digital microfluidic device. Lab on a Chip. 2020 May;20(10):1845-1855. DOI: 10.1039/d0lc00302f. |
| Direct writing of liquids by micro dispensing: Stability and shape of laminar jets with high Froude numbers | Sreemannarayana Mypati, Aristides Docoslis, Dominik P.J. Barz | 2020 | JR-DEV 79-79-10 | Sreemannarayana Mypati, Aristides Docoslis, Dominik P.J. Barz, Direct writing of liquids by micro dispensing: Stability and shape of laminar jets with high Froude numbers, Chemical Engineering Journal, Volume 381, 2020, 122645, ISSN 1385-8947, https://doi.org/10.1016/j.cej.2019.122645. |
| RF-Harvesting Tightly Coupled Rectenna Array Tee-Shirt With Greater Than Octave Bandwidth | Jose Estrada, Eric Kwiatkowski, Ana Lopez-Yela, Monica Borgonos-Garcia, Daniel Segovia-Vargas, Taylor Barton, Zoya Popovic | 2020 | HPS-FG57B | J. A. Estrada et al., “RF-Harvesting Tightly Coupled Rectenna Array Tee-Shirt With Greater Than Octave Bandwidth,” in IEEE Transactions on Microwave Theory and Techniques, doi: 10.1109/TMTT.2020.2988688. |
| A Low-Cost Paper Glucose Sensor with Molecularly Imprinted Polyaniline Electrode | Zheyuan Chen ,Christopher Wright ,Onder Dincel ,Ting-Yen Chi, and Jun Kameoka | 2020 | JS-ADEV N291 | Chen, Z.; Wright, C.; Dincel, O.; Chi, T.-Y.; Kameoka, J. A Low-Cost Paper Glucose Sensor with Molecularly Imprinted Polyaniline Electrode. Sensors 2020, 20, 1098. |
| Mechanical and High-Frequency Electrical Study of Printed, Flexible Antenna under Deformation | Yi Zhou ; Sridhar Sivapurapu ; Madhavan Swaminathan ; Suresh K. Sitaraman | 2020 | JS-B25P | Y. Zhou, S. Sivapurapu, M. Swaminathan and S. K. Sitaraman, “Mechanical and High-Frequency Electrical Study of Printed, Flexible Antenna under Deformation,” in IEEE Transactions on Components, Packaging and Manufacturing Technology, doi: 10.1109/TCPMT.2020.2995532. |
| An RF-Harvesting Tightly-Coupled Rectenna Array Tee-Shirt with Greater than Octave Bandwidth | Jose Estrada, Eric Kwiatkowski, Ana Lopez-Yela, Monica Borgonos-Garcia, Daniel Segovia-Vargas, Taylor Barton, Zoya Popovic | 2020 | HPS-FG57B | Estrada, José & Kwiatkowski, Eric & Lopez, Ana & Borgoñós, Mónica & Segovia-Vargas, Daniel & Popovic, Zoya & Barton, Taylor. (2020). An RF-Harvesting Tightly-Coupled Rectenna Array Tee-Shirt with Greater than Octave Bandwidth. IEEE Transactions on Microwave Theory and Techniques. 10.1109/TMTT.2020.2988688. |
| Band gap of reduced graphene oxide tuned by controlling functional groups | Yiqian Jin, Yiteng Zheng, Simon G. Podkolzin, and Woo Lee | 2020 | JS-B40G | Jin, Yiqian & Zheng, Yiteng & Podkolzin, Simon & Lee, Woo. (2020). Band Gap of Reduced Graphene Oxide Tuned by Controlling Functional Groups. Journal of Materials Chemistry C. 10.1039/C9TC07063J. |
| Study of inkjet-printed serpentine structure on flexible substrates deformed over sculptured surface | Isaac A Bower, Christine L Taylor and Suresh K Sitaraman | 2020 | JS-B25P | Bower, Isaac & Taylor, Christine & Tian, Ye. (2020). Study of inkjet-printed serpentine structure on flexible substrates deformed over sculptured surfaces. Flexible and Printed Electronics. 5. 10.1088/2058-8585/ab670b. |
| Characterization of Printed Humidity Sensor Based on Nanoparticle Copper Oxide | Č. Žlebič ; Lj. Živanov ; N. Blaž ; M. Kisić ; M. Luković | 2020 | JS-B25P | Č. Žlebič, L. Živanov, N. Blaž, M. Kisić and M. Luković, “Characterization of Printed Humidity Sensor Based on Nanoparticle Copper Oxide,” 2020 23rd International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS), Novi Sad, Serbia, 2020, pp. 1-4, doi: 10.1109/DDECS50862.2020.9095702. |
| Magnetic Proximity Sensor Based on Magnetoelectric Composites and Printed Coils | Nélson Pereira,Ana Catarina Lima,Vitor Correia,Nikola Peřinka ,Senentxu Lanceros-Mendez and Pedro Martins | 2020 | HPS-021LV | Pereira, N.; Lima, A.C.; Correia, V.; Peřinka, N.; Lanceros-Mendez, S.; Martins, P. Magnetic Proximity Sensor Based on Magnetoelectric Composites and Printed Coils. Materials 2020, 13, 1729. |
| Flexible inkjet-printed Patch antenna array on mesoporous PET substrate for 5G applications with stable RF performance after mechanical stress cycling | Gurvinder Singh Khinda ; Ashraf Umar ; Ryan J. Cadwell ; Mohammed Alhendi ; Nancy C. Stoffel ; Peter Brogesen ; Mark D Poliks | 2020 | JS-B25HV | G. S. Khinda et al., “Flexible inkjet-printed Patch antenna array on mesoporous PET substrate for 5G applications with stable RF performance after mechanical stress cycling,” 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2020, pp. 1824-1831, doi: 10.1109/ECTC32862.2020.00285. |
| 3D-printed and wireless piezoelectric tactile sensors | Linda Choi ; Zhangxian Deng | 2020 | JS-A191 | Choi, Linda & Deng, Zhangxian. (2020). 3D-printed and wireless piezoelectric tactile sensors (Conference Presentation). 77. 10.1117/12.2558222. |
| Exceptional electromagnetic shielding efficiency of silver coated carbon fiber fabrics via a roll-to-roll spray coating process | Janghoon Park; Xiyu Hu; Mahsa Torfeh; Uzodinma Okoroanyanwu; Amir Arbabi; James J. Watkins | 2020 | JS-B25HV | Park, Janghoon & Torfeh, Mahsa & Okoroanyanwu, Uzodinma & Arbabi, Amir & Watkins, James. (2020). Exceptional Electromagnetic Shielding Efficiency of Silver Coated Carbon Fiber Fabrics via Roll-to-Roll Spray Coating Process. Journal of Materials Chemistry C. 10.1039/D0TC02048F. |
| Flexible Humidity Sensors for Wireless Monitoring Based on Electrospun Sulfonated Polyether Ether Ketone (SPEEK) Nanofibres | Jonghyun Choi ; Yi Chen ; Robert Abbel ; Ian Visagie | 2020 | PSI-211 | Choi, Jonghyun & Chen, Yi & Abbel, Robert & Visagie, Ian & Parker, Kate. (2020). Flexible Humidity Sensors for Wireless Monitoring Based on Electrospun Sulfonated Polyether Ether Ketone (SPEEK) Nanofibres. Sensors and Actuators B: Chemical. 10.1016/j.snb.2020.128704. |
| Novel gas sensing platform based on a stretchable laser-induced graphene pattern with self-heating capabilities | Li Yang ; Ning Yi ; Jia Zhu ; Zheng Cheng | 2020 | JS-A191 | Yang, Li & Yi, Ning & Zhu, Jia & Cheng, Zheng & Yin, Xinyang & Zhang, Xueyi & Zhu, Hongli & Cheng, Huanyu. (2020). Novel gas sensing platform based on a stretchable laser-induced graphene pattern with self-heating capabilities. Journal of Materials Chemistry A. 8. 10.1039/C9TA07855J. |
| A Pen-Writable Electroless Plating Method for Large-Area RF Circuit Applications | Yihang Chu ; Premjeet Chahal | 2020 | JS-A221AE | Chu, Yihang & Chahal, Premjeet. (2020). A Pen-Writable Electroless Plating Method for Large-Area RF Circuit Applications. 1763-1768. 10.1109/ECTC32862.2020.00275. |
| COLOUR FASTNESS ANALYSIS OF PRINTED ELECTRONICS THROUGH THE FLEXOGRAPHY TECHNIQUE ON TEXTILE SUBSTRATES | RODES-CARBONELL Ana M , FERRI Josué , GARCIA-BREIJO Eduardo , BOUBELDA Eva | 2020 | PFI-600 | Rodes, Ana & Ferri, Josue & Garcia, Eduardo & Bou, Eva. (2020). Colour Fastness Analysis of Printed Electronics Through the Flexography Technique on Textile Substrates. |
| Highly stretchable wrinkled electrode based on silver ink‐elastomer nanocomposite with excellent fatigue resistance | Joohye Won ; Subhadip Mondal ; Jongho Park ; Wonseok Wang ; Hyunsang Lee | 2020 | HPS-021LV | Won, Joohye & Mondal, Subhadip & Park, Jongho & Wang, Wonseok & Lee, Hyunsang & Kim, Suhyun & Shin, Beomsu & G S, Shibulal & Nah, Changwoon. (2020). Highly stretchable wrinkled electrode based on silver ink-elastomer nanocomposite with excellent fatigue resistance. Polymer Composites. 10.1002/pc.25532. |
| Laser Functionalization of Carbon Membranes for Effective Immobilization of Antimicrobial Silver Nanoparticles | Sina Nejati ; S. Ahmad Mirbagheri ; Khaje Nasir ; Jose Waimin ; Marisa E. Grubb | 2020 | JS-B25HV | Nejati, Sina & Mirbagheri, S. Ahmad & Waimin, Jose & Grubb, Marisa & Peana, Samuel & Warsinger, David & Rahimi, Rahim. (2020). Laser Functionalization of Carbon Membranes for Effective Immobilization of Antimicrobial Silver Nanoparticles. Journal of Environmental Chemical Engineering. 8. 104109. 10.1016/j.jece.2020.104109. |
| Sulfur-Doped Titanium Carbide MXenes for Room Temperature Gas Sensing | Shoumya Nandy Shuvo ; Ana M. Ulloa G. ; Avanish Mishra ; Winston Yenyu Chen | 2020 | JS-B25HV | Shuvo, Shoumya Nandy & Ulloa G., Ana & Mishra, Avanish & Chen, Winston & Dongare, Avinash & Stanciu, Lia. (2020). Sulfur-Doped Titanium Carbide MXenes for Room Temperature Gas Sensing. ACS Sensors. XXXX. 10.1021/acssensors.0c01287. |
| Aerosol jet printing on paper substrate with conductive silver nano material | Shao Ying Huang ; Wenwei Yu ; Vijayasarathi Nagarajan ; Yi-Dan Chen ; David W. Rosen | 2020 | HPS-108AE1 | Chen, Yi-Dan & Nagarajan, Vijayasarathi & Rosen, David & Yu, Wenwei & Huang, Shao Ying. (2020). Aerosol jet printing on paper substrate with conductive silver nano material. Journal of Manufacturing Processes. 58. 55-66. 10.1016/j.jmapro.2020.07.064. |
| Mechanically Robust Additively Manufactured Magnetically Coupled Aperture and Patch Microstrip to Rectangular Waveguide Transition | Scott Merril | 2020 | HPS-FG57B | Merill, Scott. (2020) . Mechanically Robust Additively Manufactured Magnetically Coupled Aperture and Patch Microstrip to Rectangular Waveguide Transition |
| From Top to Bottom, Simple and Cost-Effective Methods to Nanopattern and Manufacture Anti-Delaminating, Thermally Stable Platforms on Kapton HN Flexible Films Using Inkjet Printing Technology to Produce Printable Nitrate Sensors, Mercury Aptasensors, Protein Sensors, and p-Type Organic Thin Film Transistors | Li-Kai Lin, Jung-Ting Tsai, Susana Díaz-Amaya, Muhammed R. Oduncu, Yifan Zhang,† Peng-Yuan Huang, Carlos Ostos, Jacob P. Schmelzel, Raheleh Mohammadrahimi, Pengyu Xu, Nithin Raghunathan, Xinghang Zhang, Alexander Wei, David Bahr, Dimitrios Peroulis, and Lia A. Stanciu | 2020 | JS-B40G | Lin, Li-Kai & Tsai, Jung-Ting & Díaz Amaya, Susana & Oduncu, M. & Zhang, Yifan & Huang, Peng & Ostos, Carlos & Schmelzel, Jacob & Mohammadrahimi, Raheleh & Xu, Pengyu & Raghunathan, Nithin & Zhang, Xinghang & Wei, Alexander & Bahr, David & Peroulis, Dimitrios & Stanciu, Lia. (2020). Cost-Effective Methods to Nanopattern Thermally Stable Platforms on Kapton HN Flexible Films Using Inkjet Printing Technology to Produce Printable Nitrate Sensors, Mercury Aptasensors, Protein Sensors, and Organic Thin Film Transistors. |
| On‐Demand Printing of Wearable Thermotherapy Pad | Dong-Il Moon ; G. Pleckaityte ; Taejun Choi ; Myeong-Lok Seol ; Beomseok Kim | 2020 | JS-B25P | Moon, Dong‐Il & Plečkaitytė, Gintarė & Choi, Taejun & Seol, Myeong-Lok & Kim, Beomseok & Lee, Dongil & Han, Jin‐Woo & Meyyappan, M.. (2020). On‐Demand Printing of Wearable Thermotherapy Pad. Advanced Healthcare Materials. 9. 10.1002/adhm.201901575. |
| Stretchability of Serpentine Interconnect on Polymer Substrate for Flexible Electronics: A Geometry and Material Sensitivity Analysis | Chong Ye ; Benjamin G. Stewart ; Suresh K. Sitaraman | 2020 | JS-B25P | Ye, Chong & Stewart, Benjamin & Tian, Ye. (2020). Stretchability of Serpentine Interconnect on Polymer Substrate for Flexible Electronics: A Geometry and Material Sensitivity Analysis. 1533-1541. 10.1109/ECTC32862.2020.00241. |
2019
| Title | Author | Year | Ink Mentioned | Journal Citation |
|---|---|---|---|---|
| Effects of Oven and Laser Sintering Parameters on the Electrical Resistance of IJP Nano-Silver Traces on Mesoporous PET Before and During Fatigue Cycling | G.S. Khinda ; M.Z. Kokash SUNY Binghamton ; M. Alhendi ; M. Yadav ; J.P. Lombardi ; D.L. Weerawarne ; Mark D. Poliks; P. Borgesen; Nancy C. Stoffel | 2019 | JS-B25HV | Khinda, Gurvinder Singh & Kokash, Maan & Alhendi, Mohammed & Yadav, Manu & Lombardi, J.P. & Weerawarne, Darshana & Poliks, Mark & Borgesen, Peter & Stoffel, Nancy. (2019). Effects of Oven and Laser Sintering Parameters on the Electrical Resistance of IJP Nano-Silver Traces on Mesoporous PET Before and During Fatigue Cycling. 1946-1951. 10.1109/ECTC.2019.00299. |
| Preliminary Study on a Strain Sensor Printed on 3D-plastic Surfaces for Smart Devices | Michela Borghetti ; Edoardo Cantù | 2019 | HPS-108AE1 | M. Borghetti and E. Cantù, “Preliminary Study on a Strain Sensor Printed on 3D-plastic Surfaces for Smart Devices,” 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT), Naples, Italy, 2019, pp. 249-253, doi: 10.1109/METROI4.2019.8792896. |
| Distance-Independent Contactless Interrogation of Quartz Resonator Sensor with Printed-on-Crystal Coil | M. Ferrari, M. Demori, M. Baù, V. Ferrari | 2019 | HPS-108AE1 | Ferrari, Marco & Demori, Marco & Baù, Marco & Ferrari, Vittorio. (2020). Distance-Independent Contactless Interrogation of Quartz Resonator Sensor with Printed-on-Crystal Coil. 10.1007/978-3-030-37558-4_44. |
| Printed Coil on Quartz Crystal Resonator Sensor for Electromagnetic Contactless Interrogation | Marco Baù ; Marco Demori ; Marco Ferrari ; Vittorio Ferrari | 2019 | HPS-108AE1 | M. Baù, M. Demori, M. Ferrari and V. Ferrari, “Printed Coil on Quartz Crystal Resonator Sensor for Electromagnetic Contactless Interrogation,” 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), Glasgow, United Kingdom, 2019, pp. 1-3, doi: 10.1109/FLEPS.2019.8792240. |
| Fabrication of Resistor Component Using Magnetostrictive Inkjet Printing at Room Temperature | HJ Kim, A Yadav, YW Park | 2019 | JS-B40G | Kim, Hong–Ju & Yadav, Apurva & Park, Young-Woo. (2019). Fabrication of Resistor Component Using Magnetostrictive Inkjet Printing at Room Temperature. Journal of Imaging Science and Technology. 63. 10.2352/J.ImagingSci.Technol.2019.63.4.040408. |
| An Octave Bandwidth RF Harvesting Tee-Shirt | José Antonio Estrada ; Eric Kwiatkowski ; Ana López-Yela ; Mónica Borgoñós-García ; Daniel Segovia-Vargas; Taylor Barton; Zoya Popovic | 2019 | HPS-FG57B | J. Antonio Estrada et al., “An Octave Bandwidth RF Harvesting Tee-Shirt,” 2019 IEEE Wireless Power Transfer Conference (WPTC), London, United Kingdom, 2019, pp. 232-235, doi: 10.1109/WPTC45513.2019.9055642. |
| Printing Contractive Silver Conductive Inks Using Interface Interactions to Overcome Dewetting | Kevin Ton; Ta-Ya Chu; Zhiyi Zhang; Ye Tao | 2019 | JS-A101 | K. Ton, T. Chu, Z. Zhang and Y. Tao, “Printing Contractive Silver Conductive Inks Using Interface Interactions to Overcome Dewetting,” in IEEE Journal of the Electron Devices Society, vol. 7, pp. 756-760, 2019, doi: 10.1109/JEDS.2019.2904012. |
| Quartz Crystal Resonator Sensor With Printed-on-Crystal Coil for Dual-Harmonic Electromagnetic Contactless Interrogation | M. Baù ; M. Ferrari ; V. Ferrari | 2019 | HPS-108AE1 | M. Baù, M. Ferrari and V. Ferrari, “Quartz Crystal Resonator Sensor With Printed-on-Crystal Coil for Dual-Harmonic Electromagnetic Contactless Interrogation,” in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 67, no. 4, pp. 883-886, April 2020, doi: 10.1109/TUFFC.2019.2956814. |
| Dielectric Embedded Bandpass FSS Linear to Circular Polarisation Transformers | S Clendinning ; R Cahill ; D Zelenchuk ; V Fusco | 2019 | JS-B25HV | S. Clendinning, R. Cahill, D. Zelenchuk and V. Fusco, “Dielectric Embedded Bandpass FSS Linear to Circular Polarisation Transformers,” 2019 13th European Conference on Antennas and Propagation (EuCAP), Krakow, Poland, 2019, pp. 1-5. |
| Using Conformal Printed Electronics for 3D Printed Antenna Systems Building Blocks | Nathan Langford ; Sammy Shina | 2019 | HPS-030AE1 | N. Langford and S. Shina, “Using Conformal Printed Electronics for 3D Printed Antenna Systems Building Blocks,” 2019 Pan Pacific Microelectronics Symposium (Pan Pacific), Kauai, HI, USA, 2019, pp. 1-16, doi: 10.23919/PanPacific.2019.8696768. |
| Sheet Resistance Measurement of Inkjet Printed Layers | Elitsa Gieva ; Georgi Nikolov ; Boyanka Nikolova | 2019 | JS-B25P | E. Gieva, G. Nikolov and B. Nikolova, “Sheet Resistance Measurement of Inkjet Printed Layers,” 2019 42nd International Spring Seminar on Electronics Technology (ISSE), Wroclaw, Poland, 2019, pp. 1-6, doi: 10.1109/ISSE.2019.8810284. |
| Optical Chemical Sensing Exploiting Inkjet Printing Technology and Molecularly Imprinted Polymers | Nunzio Cennamo, Luigi Zeni, M. Pesavento, Simone Marchetti, Salvatore Baglio, Salvatore Graziani, Vincenzo Marletta, Antonio Pistorio, Bruno Andò | 2019 | JS-B15P | N. Cennamo et al ., “Optical Chemical Sensing Exploiting Injket |
| Design and Fabrication of Ink-Jet Printed Logic Gates using SWCNT-FET for Flexible Circuit Applications | Reza Kamali-Sarvestani ; Bryce Martin ; Landon Brayden | 2019 | not specified | R. Kamali-Sarvestani, B. Martin and L. Brayden, “Design and Fabrication of Ink-Jet Printed Logic Gates using SWCNT-FET for Flexible Circuit Applications,” 2019 IEEE International Symposium on Circuits and Systems (ISCAS), Sapporo, Japan, 2019, pp. 1-5, doi: 10.1109/ISCAS.2019.8702776. |
| Excimer laser sintereing of silver nanoparticles electrodes for fully solution processed organic thin film transistors | Abdullah S.Alshammariac ; Mohammad R.Alenezi ; S.R.P.Silva | 2019 | JS-015 | Alshammari, Abdullah & Alenezi, Mohammad & Silva, S Ravi. (2019). Excimer laser sintereing of silver nanoparticles electrodes for fully solution processed organic thin film transistors. Optics & Laser Technology. 120. 10.1016/j.optlastec.2019.105758. |
| Direct Printing of a Multi-Layer Sensor on Pet Substrate for CO2 Detection | Bruno Andò ,Salvatore Baglio ,Giovanna Di Pasquale ,Antonio Pollicino ,Salvatore Graziani ,Chiara Gugliuzzo ,Cristian Lombardo, and Vicenzo Marletta | 2019 | JS-015 | Andò, Bruno & Baglio, Salvo & Pasquale, Giovanna & Pollicino, Antonino & Graziani, Salvatore & Gugliuzzo, Chiara & Lombardo, Cristian & Marletta, Vincenzo. (2019). Direct Printing of a Multi-Layer Sensor on Pet Substrate for CO2 Detection. Energies. 12. 557. 10.3390/en12030557. |
| A Miniaturized Tree-Shaped Fractal Antenna Printed on a Flexible Substrate: A Lightweight and Low-Profile Candidate With a Small Footprint for Spaceborne and Wearable Applications | Farzad Mokhtari-Koushyar ; Peter M. Grubb ; Maggie Yihong Chen ; Ray T. Chen | 2019 | JS-B40G | F. Mokhtari-Koushyar, P. M. Grubb, M. Y. Chen and R. T. Chen, “A Miniaturized Tree-Shaped Fractal Antenna Printed on a Flexible Substrate: A Lightweight and Low-Profile Candidate With a Small Footprint for Spaceborne and Wearable Applications,” in IEEE Antennas and Propagation Magazine, vol. 61, no. 3, pp. 60-66, June 2019, doi: 10.1109/MAP.2019.2907878. |
| Optical Chemical Sensing Exploiting Inkjet Printing Technology and Molecularly Imprinted Polymers | Nunzio Cennamo ; Luigi Zeni ; M. Pesavento ; Simone Marchetti ; Salvatore Baglio ; Salvatore Graziani ; Vincenzo Marletta ; Antonio Pistorio ; Bruno Andò | 2019 | JS-B15P | Cennamo, Nunzio & Zeni, Luigi & Ando, Bruno & Baglio, Salvo & Graziani, Salvatore & Marletta, Vincenzo & Pistorio, Antonio & Pesavento, Maria & Marchetti, Simone. (2018). A novel chemical optical sensor based on molecularly imprinted polymer, optical fibers and inkjet printing technology. 1-5. 10.1109/I2MTC.2018.8409619 |
| Cross-Linking Stabilizes Electrical Resistance of Reduced Graphene Oxide in Humid Environments | Yiqian Jin ; Woo Lee | 2019 | JS-B40G | Jin, Yiqian & Lee, Woo. (2019). Cross-Linking Stabilizes Electrical Resistance of Reduced Graphene Oxide in Humid Environments. Langmuir. 35. 10.1021/acs.langmuir.8b03416. |
| A Miniaturized Tree-Shaped Fractal Antenna Printed on a Flexible Substrate | Farzad Moktari ; Peter Grubb ; Maggie Yihong Chen ; Ray Chen | 2019 | JS-B40G | Mokhtari Kouhsyar, Farzad & Grubb, Peter & Chen, Maggie & Chen, Ray. (2019). A Miniaturized Tree-Shaped Fractal Antenna Printed on a Flexible Substrate: A Lightweight and Low-Profile Candidate With Small Footprint for Spaceborne and Wearable Applications.. IEEE Antennas and Propagation Magazine. PP. 1-1. 10.1109/MAP.2019.2907878. |
| Fully Inkjet-Printed CuO Sensor on Flexible Polymer Substrate for Alcohol Vapours and Humidity Sensing at Room Temperature | Petr Krcmar,Ivo Kuritka ,Jan Maslik,Pavel Urbanek,Pavel Bazant,Michal Machovsky,Pavol Suly andPetr Merka | 2019 | JS-B25HV | Krcmar, Petr & Kuřitka, Ivo & Mašlík, Jan & Urbanek, Pavel & Bazant, Pavel & Machovsky, Michal & Suly, Pavol & Merka, Petr. (2019). Fully Inkjet-Printed CuO Sensor on Flexible Polymer Substrate for Alcohol Vapours and Humidity Sensing at Room Temperature. Sensors. 19. 3068. 10.3390/s19143068. |
| Low temperature atomic layer deposition of zirconium oxide for inkjet printed transistor applications | Mohi Uddin Jewel ; MD Shamim Mahmud ; Mahmuda Akter Monnb ; Alex Zakhidovb ; Maggie Yihong Chen | 2019 | JS-B40G | Jewel, Mohi & Mahmud, Md Shamim & Monne, Mahmuda & Zakhidov, Alex & Chen, Maggie. (2019). Low temperature atomic layer deposition of zirconium oxide for inkjet printed transistor applications. RSC Advances. 9. 1841-1848. 10.1039/C8RA08470J. |
| An inkjet printed pressure sensor for applications in Active Ageing monitoring | B. Andò ; S. Baglio ; S. Castorina ; R. Crispino ; V. Marletta | 2019 | JS-B15P | B. Andò, S. Baglio, S. Castorina, R. Crispino and V. Marletta, “An inkjet printed pressure sensor for applications in Active Ageing monitoring,” 2019 IEEE Sensors Applications Symposium (SAS), Sophia Antipolis, France, 2019, pp. 1-5, doi: 10.1109/SAS.2019.8705972. |
| Electric Stimulus-Responsive Chitosan/MNP Composite Microbeads for a Drug Delivery System | Ankita Mohapatra ; Carlos Wells ; Amber Jennings ; Madhav Ghimire ; Sanjay R. Mishra ; Bashir I. Morshed | 2019 | JS-B40HV | A. Mohapatra, C. Wells, A. Jennings, M. Ghimire, S. R. Mishra and B. I. Morshed, “Electric Stimulus-Responsive Chitosan/MNP Composite Microbeads for a Drug Delivery System,” in IEEE Transactions on Biomedical Engineering, vol. 67, no. 1, pp. 226-233, Jan. 2020, doi: 10.1109/TBME.2019.2911579. |
| L-Shaped Chipless Tag Design Analysis and Optimization for Fully Inkjet Printing | Vinicius Ferro ; Pedro Rebello ; Matheus Quadros ; Wagston Staehler | 2019 | JS-B40G | V. Ferro, P. Rebello, M. Quadros and W. Staehler, “L-Shaped Chipless Tag Design Analysis and Optimization for Fully Inkjet Printing,” 2019 IEEE International Conference on RFID (RFID), Phoenix, AZ, USA, 2019, pp. 1-8, doi: 10.1109/RFID.2019.8719282. |
| Sintering Temperature Impact on Sheet Resistance of Inkjet Printed Layers | Boyanka Marinova Nikolova ; Elitsa Emilova Gieva ; Georgi Todorov Nikolov ; Ivelina Nikolaeva Ruskova ; Mladen Georgiev Mladenov | 2019 | JS-B25P | B. M. Nikolova, E. E. Gieva, G. T. Nikolov, I. N. Ruskova and M. G. Mladenov, “Sintering Temperature Impact on Sheet Resistance of Inkjet Printed Layers,” 2019 X National Conference with International Participation (ELECTRONICA), Sofia, Bulgaria, 2019, pp. 1-4, doi: 10.1109/ELECTRONICA.2019.8825642. |
| HapSense: A Soft Haptic I/O Device with Uninterrupted Dual Functionalities of Force Sensing and Vibrotactile Actuation | Sang Ho Yoon ; Siyuan Ma ; Siyuan Ma , Woosuk Lee ; Woo Suk Lee ; Shantanu Thakurdesai ; Shantanu Thakurdesai , Di Sun ; Di Sun , Flávio P Ribeiro; Flávio P. Ribeiro , James D Holbery ; James D. Holbery | 2019 | HPS-021LV | Yoon, Sang Ho & Ma, Siyuan & Lee, Woo & Thakurdesai, Shantanu & Sun, Di & Ribeiro, Flávio & Holbery, James. (2019). HapSense: A Soft Haptic I/O Device with Uninterrupted Dual Functionalities of Force Sensing and Vibrotactile Actuation. 949-961. 10.1145/3332165.3347888. |
| Printed Strain Gauge on 3D and Low-Melting Point Plastic Surface by Aerosol Jet Printing and Photonic Curing | Michela Borghetti ; Mauro Serpelloni ; Emilio Sardini | 2019 | HPS-108AE1 | Borghetti, Michela & Serpelloni, Mauro & Sardini, Emilio. (2019). Printed Strain Gauge on 3D and Low-Melting Point Plastic Surface by Aerosol Jet Printing and Photonic Curing. Sensors. 19. 4220. 10.3390/s19194220. |
| Invasive Plant-based Paper as a Substrate for Electroconductive Printing Inks | Urska Kavcic ; Igor Karlovits | 2019 | JS-A102A | Kavcic, Urska & Karlovits, Igor. (2019). Invasive Plant-based Paper as a Substrate for Electroconductive Printing Inks. 10.14622/Advances_46_2019. |
| Investigation of stencil/ screen printing of silver (Ag) electrodes for ionic polymer metal composites (IPMCs) | Rick Lange ; Marc Maris ; Evangelos Augoulas ; Eva Sideris ; Erik Homburg | 2019 | HPS-FG57B | Lange, Rick & Maris, Marc & Augoulas, Evangelos & Sideris, Eva & Homburg, Erik. (2019). Investigation of stencil/ screen printing of silver (Ag) electrodes for ionic polymer metal composites (IPMCs). 6. 10.1117/12.2514292. |
| Suppression of Antenna Backscatter on a Nanosat Using a Resistively Loaded FSS Absorber | Gabriel G. Machado ; Robert Cahill ; Vincent Fusco ; Gareth A. Conway | 2019 | JS-B25P | Machado, Gabriel & Cahill, Robert & Fusco, V.F. & Conway, Gareth. (2019). Suppression of Antenna Backscatter on a Nanosat Using a Resistively Loaded FSS Absorber. IEEE Antennas and Wireless Propagation Letters. PP. 1-1. 10.1109/LAWP.2019.2945399. |
| Resistively loaded ultra-thin FSS absorbers for radio-frequency enhancement of spacecraft thermal blankets | Gabriel G. Machado ; Robert Cahill ; Vincent Fusco ; Gareth A. Conway | 2019 | JS-B25P | Machado, Gabriel & Cahill, Robert & Fusco, V.F. & Conway, Gareth. (2019). Resistively Loaded Ultra-Thin FSS Absorbers for RF Enhancement of Spacecraft Thermal Blankets. IET Microwaves, Antennas & Propagation. 13. 10.1049/iet-map.2018.6099. |
| NATIFLife-A Smart Sensor Network for Assistive Domotics | Bruno Ando ; Salvo Baglio ; Salvatore Castorina ; Ruben Crispino ; Salvatore Graziani ; Vincenzo Marletta ; Luca Porcaro ; Sebastiano Salupo | 2019 | JS-B15P | Ando, Bruno & Baglio, Salvo & Castorina, Salvatore & Crispino, Ruben & Graziani, Salvatore & Marletta, Vincenzo & Porcaro, Luca & Salupo, Sebastiano. (2019). NATIFLife-A Smart Sensor Network for Assistive Domotics. 1-6. 10.1109/IWMN.2019.8805013. |
| Comparison of FSS Topologies for Maximising the Bandwidth of Ultra-thin Microwave absorbers | Gabriel Machado | 2019 | JS-B25HV | Machado, Gabriel. (2019). Comparison of FSS Topologies for Maximising the Bandwidth of Ultra-Thin Microwave Absorbers. |
| CNT-Based Inkjet-Printed RF Gas Sensor: Modification of Substrate Properties during the Fabrication Process | Julien George ; Aymen Abdelghani ; Prince Bahoumina ; Olivier Tantot ; Dominique Baillargeat ; Kamel Frigui ; Stéphane Bila ; Hamida Hallil ; Corinne Dejous | 2019 | JS-B25HV | George, Julien & Abdelghani, Aymen & Bahoumina, Prince & Tantot, Olivier & Baillargeat, Dominique & Frigui, Kamel & Bila, Stéphane & Hallil, Hamida & Dejous, Corinne. (2019). CNT-Based Inkjet-Printed RF Gas Sensor: Modification of Substrate Properties during the Fabrication Process. Sensors. 19. 1768. 10.3390/s19081768. |
| Virtual System for Sheet Resistance Measurement of Inkjet Printed Conductive Layers | Georgi Todorov Nikolov ; Elitsa Emilova Gieva ; Boyanka Marinova Nikolova ; Ivelina Nikolaeva Ruskova | 2019 | JS-B25P | Nikolov, Georgi & Gieva, Elitsa & Nikolova, Boyanka & Ruskova, Ivelina. (2019). Virtual System for Sheet Resistance Measurement of Inkjet Printed Conductive Layers. 1-4. 10.1109/ELECTRONICA.2019.8825617. |
| Influence of Temperature over Impedance of Different Inkjet Printed Patterns and Substrates | B. Nikolova ; G. Nikolov ; E. Gieva ; I. Ruskova ; M. Mladenov | 2019 | JS-B25P | B. Nikolova, G. Nikolov, E. Gieva, I. Ruskova and M. Mladenov, “Influence of Temperature over Impedance of Different Inkjet Printed Patterns and Substrates,” 2019 IEEE 31st International Conference on Microelectronics (MIEL), Nis, Serbia, 2019, pp. 205-208, doi: 10.1109/MIEL.2019.8889594. |
| Impedance Measurement of Inkjet Printed Planar Structures | Elitsa Emilova Gieva ; Georgi Todorov Nikolov ; Boyanka Marinova Nikolova ; Ivelina Nikolaeva Ruskova | 2019 | JS-B25P | E. E. Gieva, G. T. Nikolov, B. M. Nikolova and I. N. Ruskova, “Impedance Measurement of Inkjet Printed Planar Structures,” 2019 IEEE XXVIII International Scientific Conference Electronics (ET), Sozopol, Bulgaria, 2019, pp. 1-4, doi: 10.1109/ET.2019.8878607. |
| Temperature Sensing with Inkjet Printed Structures | Elitsa Emilova Gieva ; Georgi Todorov Nikolov ; Boyanka Marinova Nikolova ; Ivelina Nikolaeva Ruskova | 2019 | JS-B25P | E. E. Gieva, G. T. Nikolov, B. M. Nikolova and I. N. Ruskova, “Temperature Sensing with Inkjet Printed Structures,” 2019 IEEE XXVIII International Scientific Conference Electronics (ET), Sozopol, Bulgaria, 2019, pp. 1-4, doi: 10.1109/ET.2019.8878639. |
| All-printed multilayer materials with improved magnetoelectric response | Ana Catarina Lima ; Nélson Pereira ; Rita Polícia ; Clarisse Ribeiro ; Vitor Correia | 2019 | HPS-021LV | Lima, Ana & Pereira, Nelson & Policia, Rita & Ribeiro, C. & Correia, Vitor & Lanceros-Méndez, Senentxu & Martins, Pedro. (2019). All-printed multilayer materials with improved magnetoelectric response. Journal of Materials Chemistry C. 7. 10.1039/C9TC01428D. |
| Microwave performance of flexo-printed chipless RFID tags | Sika Shrestha ; Ramprakash Yerramilli ; Nemai Chandra Karmakar | 2019 | PFI-722 | Shrestha, Sika & Yerramilli, Ramprakash & Karmakar, Nemai. (2019). Microwave performance of flexo-printed chipless RFID tags. Flexible and Printed Electronics. 4. 10.1088/2058-8585/ab4b09. |
| Wireless Resonant Circuits Printed Using Aerosol Jet Deposition for MRI Catheter Tracking | Caroline D. Jordan ; Bradford R. H. Throne ; Arjun Wadhwa ; Aaron D. Losey ; Eugene Ozhinsky | 2019 | HPS-108AE1 | Jordan, Caroline & Throne, Bradford & Wadhwa, Arjun & Losey, Aaron & Ozhinsky, Eugene & Kondapavulur, Sravani & Fratello, Vincent & Moore, Teri & Stillson, Carol & Yee, Colin & Watkins, RD & Scott, Greig & Martin, Alastair & Zhang, Xiaoliang & Wilson, Mark & Hetts, Steven. (2019). Wireless Resonant Circuits Printed Using Aerosol Jet Deposition for MRI Catheter Tracking. IEEE Transactions on Biomedical Engineering. PP. 1-1. 10.1109/TBME.2019.2922879. |
| Flexible Hybrid Electronics for Wireless Communication | Carol Baumbauer | 2019 | JS-A102 | Baumbauer, Carol. (2019). Flexible Hybrid Electronics for Wireless Communication. |
| Multi-layer Printing of Complex Antennas Using Aerosol Jet Technology | Pooran Joshi | 2019 | JS-ADEV N258 | Joshi, Pooran. Multi-layer Printing of Complex Antennas Using Aerosol Jet Technology. United States: N. p., 2019. Web. doi:10.2172/1606863. |
| Inkjet printed array antennas with frequency controlled beamsteering and multi-angle receiving | Peter Mack Grubb ; Wentao Li ; Ray T. Chen | 2019 | JS-B40G | Grubb, Peter & Li, W.-L & Chen, Ray. (2018). Inkjet printed array antennas with frequency controlled beamsteering and multi-angle receiving. Materials Research Express. 6. 10.1088/2053-1591/aaf910. |
| Inkjet printing on PET substrate | Manjurul Ahsan Riheen, Tonmoy Kumar Saha and Praveen Kumar Sekhar | 2019 | JS-A102A | Riheen, Manjurul Ahsan & Saha, Tonmoy Kumar & Sekhar, Praveen. (2019). Inkjet Printing on PET Substrate. Journal of The Electrochemical Society. 166. B3036-B3039. 10.1149/2.0091909jes. |
| Chemico-Capacitive Sensing via Dielectric Loading | Parthiban Rajan ; Savas Kaya ; Jason T. Wright ; Akanksha Rohit ; Tianyi Cai | 2019 | JS-B40G | Rajan, Parthiban & Kaya, Savas & Wright, Jason & Rohit, Akanksha & Cai, Tianyi & Hanlon, Patrick. (2019). Chemico-Capacitive Sensing via Dielectric Loading. 1187-1190. 10.1109/MWSCAS.2019.8884965. |
| Scalable Printing of High‐Resolution Flexible Transparent Grid Electrodes Using Directed Assembly of Silver Nanoparticles | Salman A. Abbasi ; Zhimin Chai ; Ahmed Busnaina | 2019 | JS-101A | Abbasi, Salman & Chai, Zhimin & Busnaina, Ahmed. (2019). Scalable Printing of High‐Resolution Flexible Transparent Grid Electrodes Using Directed Assembly of Silver Nanoparticles. Advanced Materials Interfaces. 6. 10.1002/admi.201900898. |
| Microwave sensing schemes of CPW resonators fully printed on humidity sensitive substrates | Guy Ayissi Eyebe ; Frederic Domingue ; N. Y. Sama ; Naimi Boubekeur | 2019 | HPS-021LV | Ayissi Eyebe, Guy & Sama, Nossikpendou Yves & Boubekeur, Naimi & Domingue, Frederic. (2019). Microwave Sensing Schemes of CPW Resonators Fully Printed on Humidity Sensitive Substrates. IEEE Microwave and Wireless Components Letters. PP. 1-3. 10.1109/LMWC.2019.2899235. |
| Low-temperature reducible particle-free screen-printable silver ink for the fabrication of high conductive electrodes | G Manjunath ; Pavan Pujar ; Bikesh Gupta ; Dipti Gupta ; Saumen Mandal | 2019 | HPS-021LV | .G, Manjunath & Pujar, Pavan & Gupta, Bikesh & Gupta, · & Mandal, Saumen. (2019). Low-temperature reducible particle-free screen-printable silver ink for the fabrication of high conductive electrodes. Journal of Materials Science: Materials in Electronics. 10.1007/s10854-019-02217-9. |
| Highly sensitive humidity sensor based on ionic liquid-polymer composites | Liliana Fernandes ; Daniela M. Correia ; Nélson Pereira ; Carmen R Tubio ; S. Lanceros-Mendez | 2019 | HPS-021LV | Fernandes, Liliana & Correia, Daniela & Pereira, Nelson & Tubio, Carmen & Lanceros-Méndez, Senentxu. (2019). Highly Sensitive Humidity Sensor Based on Ionic Liquid-Polymer Composites. ACS Applied Polymer Materials. 1. 10.1021/acsapm.9b00675. |
| INK-JET PRINTED STRETCHABLE SENSORS FOR CELL MONITORING UNDER MECHANICAL STIMULI: A FEASIBILITY STUDY | Sarah Tonello ; Michela Borghetti ; Nicola Lopomo ; Mauro Serpelloni ; Emilio Sardini | 2019 | JR DEV 79-79-9 | Tonello, Sarah & Borghetti, Michela & Lopomo, Nicola Francesco & Serpelloni, Mauro & Sardini, Emilio & Marziano, Mariagrazia & SERZANTI, MARIALAURA & Uberti, Daniela & Dell’Era, Patrizia & Inverardi, Nicoletta & Gualandi, Chiara & FOCARETE, MARIA. (2019). INK-JET PRINTED STRETCHABLE SENSORS FOR CELL MONITORING UNDER MECHANICAL STIMULI: A FEASIBILITY STUDY. Journal of Mechanics in Medicine and Biology. 1950049. 10.1142/S0219519419500490. |
| Microfluidic rapid and autonomous analytical device (microRAAD) to detect HIV from whole blood samples | Elizabeth A. Phillips ; Taylor J. Moehling ; Karin F. K. Ejendal ; Orlando S. Hoilett ; Kristin M. Byers | 2019 | JS-B40G | Phillips, Elizabeth & Moehling, Taylor & Ejendal, Karin & Hoilett, Orlando & Byers, Kristin & Basing, Laud & Jankowski, Lauren & Bennett, Jackson & Lin, Li-Kai & Stanciu, Lia & Linnes, Jacqueline. (2019). Microfluidic rapid and autonomous analytical device (microRAAD) to detect HIV from whole blood samples. Lab on a Chip. 19. 10.1039/C9LC00506D. |
| Aerosol-jet printed transmission lines for microwave packaging applications | Anubha A Gupta ; Michiel C.M. Soer ; Ricardo Izquierdo ; Mohammad Taherzadeh-Sani ; Sylvain G. Cloutier | 2019 | HPS-030AE1 | Gupta, Anubha & Soer, Michiel & Taherzadeh-Sani, Mohammad & Cloutier, Sylvain & Izquierdo, Ricardo. (2019). Aerosol-Jet Printed Transmission Lines for Microwave Packaging Applications. IEEE Transactions on Components, Packaging and Manufacturing Technology. PP. 1-1. 10.1109/TCPMT.2019.2926652. |
| Performing DNA ligation on a low-cost inkjet-printed digital microfluidic device | Sari Houchaimi | 2019 | JS-B25P | Houchaimi, Sari. (2018). Performing DNA ligation on a low-cost inkjet-printed digital microfluidic device . |
| High Speed Roll-to-Roll Printable Transistor Enabled by a Pulsed Light Curable CNT Ink | Peter Mack Grubb ; Farzad Mokhtari KoushyarTravis Lenz ; Aref Asghari ; Gongwen Gan | 2019 | JS-B40G | Grubb, Peter & Mokhtari Kouhsyar, Farzad & Lenz, Travis & Asghari, Aref & Gan, Gongwen & Xia, Wenlong & Dalir, Hamed & Subbaraman, Harish & Chen, Ray. (2019). High Speed Roll-to-Roll Printable Transistor Enabled by a Pulsed Light Curable CNT Ink. Journal of Manufacturing and Materials Processing. 3. 33. 10.3390/jmmp3020033. |
| P (VDF-TrFE-CTFE) Actuators with Inkjet Printed Electrodes | K. Keith Baelz ; Andres Hunt | 2019 | JR-700LV | Baelz, K. & Hunt, Andres. (2019). P(VDF-TrFE-CTFE) Actuators with Inkjet Printed Electrodes. 327-332. 10.1109/ICCMA46720.2019.8988745. |
2018
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| Design and fabrication of inkjet printed ultrathin FSS based microwave absorbers | G G Machado ; R Cahill ; V Fusco ; G Conway | 2018 | JS-B25HV | Machado, Gabriel & Cahill, R. & Fusco, V.F. & Conway, Gareth. (2018). Design and fabrication of inkjet printed ultrathin FSS based microwave absorbers. 40 (6 pp.)-40 (6 pp.). 10.1049/cp.2018.1461. |
| Inkjet-printed flexible MEMS switches for phased-array antennas | Mahmuda Akter Monne, Xing Lan, Chunbo Zhang, and Maggie Yihong Chen | 2018 | JS-B40G | Monne, Mahmuda & Lan, Xing & Zhang, Chunbo & Chen, Maggie. (2018). Inkjet-Printed Flexible MEMS Switches for Phased-Array Antennas. International Journal of Antennas and Propagation. 2018. 1-10. 10.1155/2018/4517848. |
| Viscosity of Silver Based Nano-Inks | Peter Lukacs ; Alena Pietrikova ; Tibor Rovensky | 2018 | JS-B40G | Lukacs, Peter & Pietriková, A. & Rovensky, Tibor. (2018). Viscosity of Silver Based Nano-Inks. 1-4. 10.1109/ISSE.2018.8443627. |
| The Study of the Activation of Antibacterial Activity of Silver Nanoparticles by Laser Radiation | O. Kravchuk ; Y. Bobitski ; O. Komarovska-Porokhnyavets ; A. Barylyak | 2018 | JS-B25HV | Kravchuk, Oleksandr & Bobitski, Yaroslav & Komarovska-Porokhnyavets, O. & Barylyak, A.. (2018). The Study of the Activation of Antibacterial Activity of Silver Nanoparticles by Laser Radiation. 1-4. 10.1109/NAP.2018.8914915. |
| Viscosity Measurement of Silver Based Nano-inks | Peter Lukacs ; Alena Pietrikova ; Tibor Rovensky | 2018 | JS-B40G | Lukacs, Peter & Pietriková, A. & Rovensky, Tibor. (2018). Viscosity Measurement of Silver Based Nano-inks. Periodica Polytechnica Electrical Engineering and Computer Science. 62. 10.3311/PPee.13312. |
| Design and Fabrication of an Experimental Microheater Array Powder Sintering Printer | Nicholas Holt & Wenchao Zhou | 2018 | JS-A101A, JS-A102A | Holt, Nicholas & Zhou, Wenchao. (2018). Design and Fabrication of an Experimental Microheater Array Powder Sintering Printer. JOM. 70. 10.1007/s11837-018-2796-1. |
| Equivalent circuit model for linear to circular polarisation converters based on bandpass freestanding FSS screens | S. Clendinning ; R. Cahill ; D. Zelenchuk ; V. Fusco | 2018 | JS-B25HV | Clendinning, S. & Cahill, R. & Zelenchuk, Dmitry & Fusco, V.F.. (2018). Equivalent circuit model for linear to circular polarisation converters based on bandpass freestanding FSS screens. 17 (6 pp.)-17 (6 pp.). 10.1049/cp.2018.1438. |
| Aerosol-jet printed interconnects for 2.5 D electronic and photonic integration | Ahmed Elmogi, Wouter Soenen, Hannes Ramon, Xin Yin, Jeroen Missinne, Silvia Spiga, Markus-Christian Amann, Ashwyn Srinivasan, Peter De Heyn, Joris Van Campenhout, Johan Bauwelinck, and Geert Van Steenberge | 2018 | HPS-030AE1 | Elmogi, Ahmed & Soenen, Wouter & Ramon, Hannes & Yin, Xin & Missinne, Jeroen & Spiga, Silvia & Amann, Markus-Christian & Srinivasan, Ashwyn & Heyn, Peter & Van Campenhout, Joris & Bauwelinck, Johan & Van Steenberge, Geert. (2018). Aerosol-Jet Printed Interconnects for 2.5D Electronic and Photonic Integration. Journal of Lightwave Technology. PP. 1-1. 10.1109/JLT.2018.2848699. |
| Printed Wheatstone bridge with embedded polymer based piezoresistive sensors for strain sensing applications | H.F.Castro ; V.Correia ; N.Pereira ; P.Costab ; J.Oliveiraa ; S.Lanceros-Méndez | 2018 | HPS-021LV | Castro, Hélder & Correia, V. & Pereira, Nelson & Costab, P & Oliveiraa, J & Lanceros-Méndez, Senentxu. (2018). Printed Wheatstone bridge with embedded polymer based piezoresistive sensors for strain sensing applications. Additive Manufacturing. 20. 10.1016/j.addma.2018.01.004. |
| INKJET PRINTED SENSORS FOR ABIOTIC FACTORS MEASUREMENT | Boyanka Nikolova ; Georgi T. Nikolov ; Elitsa Gieva ; Ivelina N. Ruskova | 2018 | JS-B15P | Nikolova, Boyanka & Nikolov, Georgi & Gieva, Elitsa & Ruskova, Ivelina. (2018). INKJET PRINTED SENSORS FOR ABIOTIC FACTORS MEASUREMENT. |
| Inkjet printed thin film electronic traces on paper for low-cost body-worn electronic patch sensors | Ankita Mohapatra ; Bashir I. Morshed ; Samira Shamsir ; Syed K. Islam | 2018 | JS-B25HV | Mohapatra, Ankita & Morshed, Bashir & Shamsir, Samira & Islam, Syed. (2018). Inkjet Printed Thin Film Electronic Traces on Paper for Low-Cost Body-Worn Electronic Patch Sensors. 10.1109/BSN.2018.8329685. |
| Aerosol-jet printed interconnects for 60-Gb/S CMOS driver and microring modulator transmitter assembly | Ahmed Elmogi ; Hannes Ramon ; Joris Lambrecht ; Peter Ossieur ; Guy Torfs ; Jeroen Missinne ; Peter De Heyn ; Yoojin Ban ; Marianna Pantouvaki ; Joris Van Campenhout ; Geert Van Steenberge | 2018 | HPS-030AE1 | Elmogi, Ahmed & Ramon, Hannes & Lambrecht, Joris & Ossieur, Peter & Torfs, Guy & Missinne, Jeroen & Heyn, Peter & Ban, Yoojin & Pantouvaki, Marianna & Van Campenhout, Joris & Van Steenberge, Geert. (2018). Aerosol-Jet Printed Interconnects for 60 Gb/s CMOS Driver and Microring Modulator Transmitter Assembly. IEEE Photonics Technology Letters. PP. 1-1. 10.1109/LPT.2018.2873056. |
| Additively manufactured multi-material free-form structure with printed electronics | Guo Liang Goh, Shweta Agarwala, Guo Dong Goh, Heang Kuan Joel Tan, Liping Zhao, Tong Kuan Chuah & Wai Yee Yeong | 2018 | JS-B40G | Agarwala, Shweta & Chuah, Tong Kuan & Yeong, Wai Yee. (2018). Additively Manufactured Multi-material Free-form Structure with Printed Electronics. International Journal of Advanced Manufacturing Technology. 94. 10.1007/s00170-017-0972-z. |
| All Inkjet-Printed High On/Off Ratio Two-Dimensional Materials Field Effect Transistor | M. U. Jewel ; F. Mokhtari-Koushyar ; R. T. Chen ; M.Y. Chen | 2018 | JS-B40G | Jewel, Mohi & Chen, Maggie. (2018). All Inkjet-Printed High On/Off Ratio Two-Dimensional Materials Field Effect Transistor. 10.1109/NANO.2018.8626364. |
| Hexagonal-Pixel Surfaces for the Reconfiguration of Inkjet-Printed Antennas | Sadri Gular ; Hasan Akin Ceylan ; Ozgur Ergul | 2018 | JS-B25P | Guler, Sadri & Ceylan, Hasan & Ergul, Ozgur. (2018). Hexagonal- Pixel Surfaces for the Reconfiguration of Inkjet-Printed Antennas. 57-60. 10.1109/MMS.2018.8611901. |
| All-printed triboelectric nanogenerator | lMyeong-LokSeol ; Jin-Woo Han ; Dong-Il Moon ; Kyung Jean Yoon ; Cheol Seong Hwang ; M.Meyyappan | 2018 | JS-B25P | Seol, Myeong-Lok & Han, Jin-Woo & Moon, Dong-Il & Yoon, Kyung & Hwang, Cheol & Meyyappan, M.. (2017). All-Printed Triboelectric Nanogenerator. Nano Energy. 44. 10.1016/j.nanoen.2017.11.067. |
| A novel sensing methodology to detect furfural in water, exploiting MIPs, and inkjet-printed optical waveguides | Nunzio Cennamo ; Luigi Zeni ; Maria Pesavento ; Simone Marchetti ; Vincenzo Marletta ; Salvatore Baglio ; Salvatore Graziani ; Antonio Pistorio ; Bruno Ando | 2018 | JS-B15P | Cennamo, Nunzio & Zeni, Luigi & Pesavento, Maria & Marchetti, Simone & Marletta, Vincenzo & Baglio, Salvo & Graziani, Salvatore & Pistorio, Antonio & Ando, Bruno. (2018). A Novel Sensing Methodology to Detect Furfural in Water, Exploiting MIPs, and Inkjet-Printed Optical Waveguides. IEEE Transactions on Instrumentation and Measurement. PP. 1-8. 10.1109/TIM.2018.2879170. |
| Electrochemical promotion of propylene combustion on Ag catalytic coatings | I.Kalaitzidoua ; T.Cavoué ; A.Boreave ; L.Burel ; F.Gaillard ; L.Retailleau-Mevel ; E.A.Baranova ; M.Rieu ; J.P.Viricelle ; D.Horwat ; P.Vernoux | 2018 | HPS-FG32, HPS-090B | Kalaitzidou, Ioanna & Cavoué, T. & Boreave, Antoinette & Burel, L. & Gaillard, Francois & Retailleau-Mevel, L. & Baranova, Elena & Rieu, M. & Viricelle, J.-P & Horwat, David & Vernoux, P.. (2017). Electrochemical promotion of propylene combustion on Ag catalytic coatings. Catalysis Communications. 104. 10.1016/j.catcom.2017.10.005. |
| Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate | Riikka Mikkonen ; Matti Mäntysalo | 2018 | HPS-021LV | Mikkonen, Riikka & Mäntysalo, Matti. (2018). Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate. Microelectronics Reliability. 86. 10.1016/j.microrel.2018.05.010. |
| A novel chemical optical sensor based on molecularly imprinted polymer, optical fibers and inkjet printing technology | Nunzio Cennamo ; Luigi Zeni ; Bruno Andò ; Salvatore Baglio ; Salvatore Graziani ; Vincenzo Marletta ; Antonio Pistorio ; Maria Pesavento ; Simone Marchetti | 2018 | JS-B15P | Cennamo, Nunzio & Zeni, Luigi & Ando, Bruno & Baglio, Salvo & Graziani, Salvatore & Marletta, Vincenzo & Pistorio, Antonio & Pesavento, Maria & Marchetti, Simone. (2018). A novel chemical optical sensor based on molecularly imprinted polymer, optical fibers and inkjet printing technology. 1-5. 10.1109/I2MTC.2018.8409619. |
| Optimization and Characterization of an Inkjet Process for Printed Electronics | Patrick Hanlon | 2018 | JS-B25HV | Hanlon, P. (2018). Optimization and Characterization of an Inkjet Process for Printed Electronics. |
| Inkjet Printed Parallel Plate Capacitors Using PVP Polymer Dielectric Ink on Flexible Polyimide Substrates | Ankita Mohapatra, K Sayema Tuli, Kwei-Yu Liu, Tomoko Fujiwara, W Robert Hewitt, Frank Andrasik, I Bashir Morshed | 2018 | JS-B40G | Mohapatra, Ankita & Tuli, K. & Liu, Kwei-Yu & Fujiwara, Tomoko & Hewitt, W. & Andrasik, Frank & Morshed, Bashir. (2018). Inkjet Printed Parallel Plate Capacitors Using PVP Polymer Dielectric Ink on Flexible Polyimide Substrates. Conference proceedings: … Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. 2018. 4277-4280. 10.1109/EMBC.2018.8513262. |
| Custom tailoring of conductive ink/substrate properties for increased thin film deposition of poly (dimethylsiloxane) films | Michael Joyce, Lokendra Pal, Robert Hicks, Sachin Agate, Thomas S. Williams, Graham Ray & Paul D. Fleming | 2018 | PFI-722 | Joyce, Michael & Pal, Lokendra & Hicks, Robert & Agate, Sachin & Williams, Thomas & Ray, Graham & Fleming, P.D.. (2018). Custom tailoring of conductive ink/substrate properties for increased thin film deposition of poly(dimethylsiloxane) films. Journal of Materials Science: Materials in Electronics. 10.1007/s10854-018-9108-y. |
| Optimized inkjet-printed silver nanoparticle films: Theoretical and experimental investigations | Sreemannarayana Mypati, Shankar R. Dhanushkodi, Michael McLaren, Aristides Docoslis, A. Peppley and Dominik P. J. Barz | 2018 | JS-B40G | Mypati, Sreemannarayana & Dhanushkodi, Shankar & McLaren, Michael & Docoslis, Aristides & Peppley, Brant & Barz, Dominik. (2018). Optimized inkjet-printed silver nanoparticle films: Theoretical and experimental investigations. RSC Advances. 8. 19679-19689. 10.1039/C8RA03627F. |
| Material selection and fabrication processes for flexible conformal antennas | Mahmuda Akter Monne, Xing Lan, and Maggie Yihong Chen | 2018 | JS-B40G | Monne, Mahmuda & Lan, Xing & Chen, Maggie. (2018). Material Selection and Fabrication Processes for Flexible Conformal Antennas. International Journal of Antennas and Propagation. 2018. 1-14. 10.1155/2018/9815631. |
| Wireless resistive analog passive temperature sensors for smart and connected community | Bashir Morshed | 2018 | JS-B40G | B. I. Morshed, “Wireless resistive analog passive temperature sensors for smart & connected community,” 2018 United States National Committee of URSI National Radio Science Meeting (USNC-URSI NRSM), Boulder, CO, 2018, pp. 1-2. |
| Modeling a Nonlinear Harvester for Low Energy Vibrations | Bruno Andò ; Salvatore Baglio ; Vincenzo Marletta ; Adi R. Bulsara | 2018 | JS-B15P | Ando, Bruno & Baglio, Salvo & Marletta, Vincenzo & Bulsara, Adi. (2018). Modeling a Nonlinear Harvester for Low Energy Vibrations. IEEE Transactions on Instrumentation and Measurement. PP. 1-9. 10.1109/TIM.2018.2882901. |
| Low Cost Inkjet Printed Sensors: From Physical to Chemical Sensors | Bruno Andò; Salvatore Baglio; V. Marletta ; R. Crispino ; S. Castorina ; A. Pistorio ; Giovanna Di Pasquale ; Antonino Pollicin | 2018 | JS-015 | Andò, Bruno & Baglio, Salvo & Marletta, Vincenzo & Crispino, Ruben & Castorina, Salvatore & Pistorio, Antonio & Pasquale, Giovanna & Pollicino, Antonino. (2019). Low Cost Inkjet Printed Sensors: From Physical to Chemical Sensors: An Analysis of Chemosensory Afferents and the Projection Pattern in the Central Nervous System. 10.1007/978-3-030-04324-7_38. |
| A Fully Printed and Photonic Sintering Derived Silver-Nanoparticle-based Wearable Strain Sensors | Tianqi Wang | 2018 | JS-A191 | Wang, T. (2018). A Fully Printed and Photonic Sintering Derived Silver-nanoparticle-based Wearable Strain Sensors. |
| Print Quality Assessment by Image Processing Methods for Printed Electronics Applications | Julian Schirmer ; Jewgeni Roudenko ; Marcus Reichenberger ; Simone Neermann ; Jörg Franke | 2018 | HPS-FG32 | Schirmer, Julian & Roudenko, Jewgeni & Reichenberger, Marcus & Neermann, Simone & Franke, Jörg. (2018). Print Quality Assessment by Image Processing Methods for Printed Electronics Applications. 1-6. 10.1109/ISSE.2018.8443617. |
| Piezoelectric Inkjet-Printed Metallic Igniters | Allison K. Murray; Whitney A. Novotny ;Nikhil Bajaj ; I. Emre Gunduz ; Steven F. Son | 2018 | JS-B25HV | Murray, Allison & Novotny, Whitney & Bajaj, Nikhil & Gunduz, I. & Son, Steven & Chiu, George & Rhoads, Jeffrey. (2018). Piezoelectric Inkjet-Printed Metallic Igniters. Journal of Imaging Science and Technology. 62. 10.2352/J.ImagingSci.Technol.2018.62.4.040406. |
| Characterization of electrowetting, contact angle hysteresis, and adhesion on digital microfluidic devices with inkjet-printed electrodes | Kimberly A. Bernetski ; Collin T. Burkhart ; Kara L. Maki ; Michael J. Schertzer | 2018 | JS-B25P | Bernetski, Kimberly & Burkhart, Collin & Maki, Kara & Schertzer, Michael. (2018). Characterization of electrowetting, contact angle hysteresis, and adhesion on digital microfluidic devices with inkjet-printed electrodes. Microfluidics and Nanofluidics. 22. 10.1007/s10404-018-2119-4. |
| Processing of printed silver patterns on an ETFE substrate | Riikka Mikkonen ; Sanna Lahokallio ; Laura Frisk ; Matti Mantysalo | 2018 | HPS-021LV | Mikkonen, Riikka & Lahokallio, Sanna & Frisk, Laura & Mäntysalo, Matti. (2018). Processing of printed silver patterns on an ETFE substrate. 1-7. 10.23919/NORDPAC.2018.8423860. |
| Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate | Riikka Mikkonen ; Matti Mäntysalo | 2018 | HPS-FG32, HPS-021LV | Mikkonen, Riikka & Mäntysalo, Matti. (2018). Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate. Microelectronics Reliability. 86. 10.1016/j.microrel.2018.05.010. |
| Conformal Inkjet Printed Antennas for Small Spacecraft | Muhammadeziz Tursunniyaz | 2018 | JS-B40G | Tursunniyaz, Muhammadeziz. (2018). Conformal Inkjet Printed Antennas for Small Spacecraft. |
| All Printed Large Area E-field Antenna Utilizing Printed Organic Rectifying Diodes for RF Energy Harvesting | Miao Li ; George Daniel ; Bruce E. Kahn ; Liam H. Ohara ; Bernard D.F. Casse | 2018 | PSI-219 | Li, Miao & Daniel, George & Kahn, Bruce & Ohara, Liam & Casse, Bernard & Pretorius, Nathan & Krusor, Brent & Mei, Ping & Whiting, Gregory & Tonkin, Chip & Lupo, Donald. (2018). All Printed Large Area E-field Antenna Utilizing Printed Organic Rectifying Diodes for RF Energy Harvesting. 1-5. 10.1109/NANO.2018.8626318. |
| Effect of Organic Solvent on MWCNT-PDMS Nanocomposite Based Capacitive Pressure Sensors | Rajarajan Ramalingame ; Olfa Kanoun ; Dhivakar Rajendran ; Amoog Lakshmanan | 2018 | HPS-FG32 | Ramalingame, Rajarajan & Rajendran, Dhivakar & Lakshmanan, Amoog & Kanoun, Olfa. (2018). Effect of Organic Solvent on MWCNT-PDMS Nanocomposite Based Capacitive Pressure Sensors. 1208-1211. 10.1109/SSD.2018.8570607. |
| Fabrication and characterization of flexible spray-coated antennas | Arno Thielens ; Igal Deckman ; Reza Aminzadeh ; Ana Claudia Arias ; Jan M. Rabaey | 2018 | PSPI-1000 | Thielens, Arno & Deckman, Igal & Aminzadeh, Reza & Arias, Ana & Rabaey, J.M.. (2018). Fabrication and Characterization of Flexible Spray-Coated Antennas. IEEE Access. PP. 1-1. 10.1109/ACCESS.2018.2876286. |
| Single shot, large area metal sintering with micrometer level resolution | N. Roy, D. Behera, Obehi G. Dibua, C. S. Foong, M. Cullinan | 2018 | JS-A102A | Roy, Nilabh & Behera, Dipankar & Dibua, Obehi & Foong, Chee & Cullinan, Michael. (2018). Single shot, large area metal sintering with micrometer level resolution. Optics Express. 26. 10.1364/OE.26.025534. |
| Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing | Xiaobing Feng ; Rong SuJian Liu ; Richard Leach ; Tuonas Happenen | 2018 | PFI-722 | Feng, Xiaobing & Su, Rong & Happenen, Tuonas & Liu, Jian & Leach, Richard. (2018). Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing. Optics Express. 11. 13927-13937. 10.1364/OE.26.013927. |
| All-optical difference engine for in-process defect inspection for roll-to-roll printed electronics | Xiaobing Feng ; Rong SuTuomas Happonen ; Jian Liu ; Richard Leach | 2018 | PFI-722 | Feng, Xiaobing & Su, Rong & Happonen, Tuomas & Liu, Jian & Leach, Richard. (2018). All-optical difference engine for in-process defect inspection for roll-to-roll printed electronics. 10.1117/12.2511140. |
| Study on Impedance Behavior of a Telemetric System Operating with an Inkjet-Printed Resistive Strain Gauge | M. Bona ; E. Sardini ; M. Serpelloni ; B. Andò ; C. O. Lombardo | 2018 | JS-015 | Bona, Michele & Sardini, Emilio & Serpelloni, Mauro & Andò, B. & Lombardo, C.. (2018). Study on Impedance Behavior of a Telemetric System Operating with an Inkjet-Printed Resistive Strain Gauge. 258-266. 10.1007/978-3-319-55077-0_34. |
2017
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| Displacement sensor fabricated by 3D additive manufacturing | Nelu Blaž ; Milica Kisić ; Ljiljana Živanov ; Mirjana Damnjanović | 2017 | JS-B25P | Blaz, Nelu & Kisic, Milica & Zivanov, Ljiljana & Damnjanovic, Mirjana. (2017). Displacement sensor fabricated by 3D additive manufacturing. 1-4. 10.1109/ISSE.2017.8000998. |
| Inkjet Printing of a 20 GHz Coplanar Waveguide Monopole Antenna Using Copper Oxide Nanoparticles on Flexible Substrates: Effect of Drop Spacing on Antenna Performance | S. A. Mohassieb, K. Kirah, E. Dorsam, A. S. G. Khalil, and H. M. S. El-Hennawy | 2017 | ICI-002HV | Mohassieb, Shaimaa & Kirah, Khaled & Dörsam, Edgar & Khalil, Ahmed & El-Hennawy, Hadia. (2017). Inkjet Printing of a 20 GHz Coplanar Waveguide Monopole Antenna Using Copper Oxide Nanoparticles on Flexible Substrates: Effect of Drop Spacing on Antenna Performance. Progress In Electromagnetics Research C. 73. 87 – 95. |
| Inkjet-printed wideband circularly polarized microstrip patch array antenna on a PET film flexible substrate material | Alejandro T. Castro ; Satish Kumar Sharma | 2017 | JS-B25P | A. T. Castro and S. K. Sharma, “Inkjet-Printed Wideband Circularly Polarized Microstrip Patch Array Antenna on a PET Film Flexible Substrate Material,” in IEEE Antennas and Wireless Propagation Letters, vol. 17, no. 1, pp. 176-179, Jan. 2018, doi: 10.1109/LAWP.2017.2779440. |
| Application of Temperature-Controlled Thermal Atomization for Printing Electronics in Space | Chih-Hao Wu and Furman V. Thompson | 2017 | HPS-030AE1 | Wu, C., & Thompson, F.V. (2017). Application of Temperature-Controlled Thermal Atomization for Printing Electronics in Space. |
| Low-cost inkjet printing technology for the rapid prototyping of transducers | Bruno Andò, Salvatore Baglio, Adi R Bulsara, Teresa Emery, Vincenzo Marletta, Antonio Pistorio | 2017 | JS-B15P | Andò, Bruno & Baglio, Salvo & Bulsara, Adi & Emery, Teresa & Marletta, Vincenzo & Pistorio, Antonio. (2017). Low-Cost Inkjet Printing Technology for the Rapid Prototyping of Transducers. Sensors. 17. 748. 10.3390/s17040748. |
| Review of recent inkjet-printed capacitive tactile sensors | Ahmed Salim, Sungjoon Lim | 2017 | JS-015 | Salim A, Lim S. Review of Recent Inkjet-Printed Capacitive Tactile Sensors. Sensors (Basel). 2017;17(11):2593. Published 2017 Nov 10. doi:10.3390/s17112593 |
| Inkjet-printed flexible active multilayered structures | Charles Trudeau, Martin Bolduc, Patrick Beaupré, Patrice Topart, Christine Alain and Sylvain Cloutier | 2017 | JS-B40G | Trudeau, Charles & Bolduc, Martin & Beaupre, Patrick & Topart, Patrice & Alain, Christine & Cloutier, Sylvain. (2017). Inkjet-Printed Flexible Active Multilayered Structures. MRS Advances. 2. 1-6. 10.1557/adv.2017.237. |
| Inkjet Printing of Metallic Initiators | Whitney A Novotny | 2017 | JS-B25HV | Novotny, Whitney. (2017). Inkjet Printing of Metallic Initiators (Masters thesis, Purdue University, West Lafayette, IN, USA). Retrieved from https://docs.lib.purdue.edu/dissertations/AAI10600843/ |
| Inkjet-printed pixel antennas with hexagonal cells | Bariscan Karaosmanoglu, Sadri Guler, Hande Ibili & Ozgur Ergul | 2017 | JS-B25P | Karaosmanoglu, Bariscan & Guler, Sadri & Ibili, Hande & Ergul, Ozgur. (2017). Inkjet-printed pixel antennas with hexagonal cells. 2013-2016. 10.23919/EuCAP.2017.7928488. |
| Inkjet Printing of Nano-Silver Conductive Ink on PET Substrate | Skyler Jiang | 2017 | JS-B25P | Jiang, Skyler. (2017). Inkjet Printing of Nano-Silver Conductive Ink on PET Substrate. |
| Analysis and design of highly transparent meshed patch antenna backed by a solid ground plane | Tursunjan Yasin, Reyhan Baktur , Timothy Turpin, and Jesus Arellano | 2017 | JS-B25P | Yasin, Tursunjan & Baktur, Reyhan & Turpin, Timothy & Arellano, Jesus. (2017). Analysis and design of highly transparent meshed patch antenna backed by a solid ground plane. Progress In Electromagnetics Research M. 56. 133-144. 10.2528/PIERM16092708. |
| Screen printed silver patterns on La0. 5Sr0. 5CoO3− δ-Epoxy composite as a strategy for many-fold increase in EMI shielding | Kesavapillai Sreedeviamma Dijith , Saju Pillai, Kuzhichalil Peethambharan Surendran | 2017 | HPS-030LV | Dijith, K.s & Pillai, Saju & K. Peethambharan, Surendran. (2017). Screen printed silver patterns on La 0.5 Sr 0.5 CoO 3−δ – Epoxy composite as a strategy for many-fold increase in EMI shielding. Surface and Coatings Technology. 330. 10.1016/j.surfcoat.2017.09.063. |
| Printable Fabrication of Nanocoral‐Structured Electrodes for High‐Performance Flexible and Planar Supercapacitor with Artistic Design | Yuanjing Lin, Yuan Gao, Zhiyong Fan | 2017 | JS-B25HV | Lin, Y., Gao, Y., Fan, Z. Y., Adv. Mater. 2017, 29, 1701736. https://doi.org/10.1002/adma.201701736 |
| A Low Cost Inclinometer with InkJet-Printed Resistive Readout Strategy | Bruno Andò, Salvatore Baglio, Vincenzo Marletta, Antonio Pistorio | 2017 | JS-B15P | Andò, Bruno & Baglio, Salvo & Marletta, Vincenzo & Pistorio, Antonio. (2018). A Low Cost Inclinometer with InkJet-Printed Resistive Readout Strategy. 15-23. 10.1007/978-3-319-66802-4_3. |
| Most simple preparation of an inkjet printing of silver nanoparticles on fibrous membrane for water purification: Technological and commercial application | Sang Jin Lee, Dong Nyoung Heo, Min Heo, Mi Hee Noh, Donghyun Lee, Su A Park, Ji-Hoi Moon, and Il Keun Kwon | 2017 | JS-B25P | Lee, Sang & Heo, dong nyoung & Heo, Min & Noh, Mi & Lee, Donghyun & Park, Su & Moon, Ji-Hoi & Kwon, Il Keun. (2016). Most Simple Preparation of an Inkjet Printing of Silver Nanoparticles on Fibrous Membrane for Water Purification: Technological and Commercial Application. Journal of Industrial and Engineering Chemistry. 46. 10.1016/j.jiec.2016.10.039. |
| Additive manufactured micro-sensor from silver nanoparticles for measuring shear stress and pressure | Gaoqiang Yang, Jingke Mo, Zhenye Kang, Yeshi Dohrmann, Feng-Yuan Zhang, Shahnavaz Eilbeigi, Farnaz Farahanipad, Haiying Huang | 2017 | JS-A102 | G. Yang et al., “Additive manufactured micro-sensor from silver nanoparticles for measuring shear stress and pressure,” 2017 IEEE 12th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Los Angeles, CA, 2017, pp. 164-168, doi: 10.1109/NEMS.2017.8016997. |
| Design of Ink-Printed RFID Tags for Electronic Article Surveillance Systems | Brandt Erfeng Li ; Xiaoyou Lin ; Xue Jun Li ; Aayush Aneja | 2017 | JS-B25P | B. E. Li, X. Lin, X. J. Li and A. Aneja, “Design of Ink-Printed RFID Tags for Electronic Article Surveillance Systems,” 2017 Mediterranean Microwave Symposium (MMS), Marseille, 2017, pp. 1-4, doi: 10.1109/MMS.2017.8497077. |
| Chitosan microbeads with MNP on printed electrodes for electric stimulus responsive drug delivery | Ankita Mohapatra, Michael A. Harris, Madhav Ghimire, Bashir I. Morshed, Jessica A. Jennings, Warren O. Haggard, Joel D. Bumgardner, Sanjay R. Mishra, Tomoko Fujiwara | 2017 | JS-B40HV | A. Mohapatra et al., “Chitosan microbeads with MNP on printed electrodes for electric stimulus responsive drug delivery,” 2017 IEEE International Symposium on Medical Measurements and Applications (MeMeA), Rochester, MN, 2017, pp. 464-469, doi: 10.1109/MeMeA.2017.7985921. |
| Inkjet printed fully-passive body-worn wireless sensors for smart and connected community (SCC) | Bashir I. Morshed , Brook Harmon , Md Sabbir Zaman , Md Juber Rahman , Sharmin Afroz and Mamunur Rahman | 2017 | JS-B40G | Morshed, Bashir & Harmon, Brook & Zaman, Md Sabbir Bin & Rahman, Md Juber & Afroz, Sharmin & Rahman, Mamunur. (2017). Inkjet Printed Fully-Passive Body-Worn Wireless Sensors for Smart and Connected Community (SCC). Journal of Low Power Electronics and Applications. 7. 26. 10.3390/jlpea7040026. |
| Capacitive microwave resonator printed on a paper substrate for CNT based gas sensor | A Abdelghani, P Bahoumina, H Hallil, S Bila, D. Baillargeat, K. Frigue, N. Delhote, J. L. Lachaud, P. Coquet, A. Ravichandran, E Pichonat, C. Paragua, H Happy, D Rebière, C Dejous | 2017 | JS-B25HV | A. Abdelghani et al., “Capacitive microwave resonator printed on a paper substrate for CNT based gas sensor,” 2017 IEEE MTT-S International Microwave Symposium (IMS), Honololu, HI, 2017, pp. 513-516, doi: 10.1109/MWSYM.2017.8058611. |
| Inkjet printing of high performance transistors with micron order chemically set gaps | Peter Mack Grubb ; Harish Subbaraman ; Saungeun Park ; Deji Akinwande ; Ray T. Chen | 2017 | JS-B40G | Grubb, Peter & Subbaraman, Harish & Park, Saungeun & Akinwande, Deji & Chen, Ray. (2017). Inkjet Printing of High Performance Transistors with Micron Order Chemically Set Gaps. Scientific Reports. 7. 10.1038/s41598-017-01391-2. |
| Inkjet printing of antennas on glass or solar cells | Muhammadeziz Tursunniyaz ; Reyhan Baktur | 2017 | JS-B40G | Tursunniyaz, Muhammadeziz & Baktur, Reyhan. (2017). Inkjet printing of antennas on glass or solar cells. 865-866. 10.1109/APUSNCURSINRSM.2017.8072475. |
| Comparison of Six Different Printed Ag Inks for Coulometric Removal of Chloride Ions from Seawater: Towards an Integrated Microfluidic Platform for Desalination | M. Fighera ; P. D. van der Wal ; H. Shea | 2017 | HPS-021LV | Fighera, Marianna & Wal, P. & Shea, Herbert. (2017). Comparison of Six Different Printed Ag Inks for Coulometric Removal of Chloride Ions from Seawater: Towards an Integrated Microfluidic Platform for Desalination. ECS Transactions. 75. 1-12. 10.1149/07541.0001ecst. |
| A Clear Antenna on CubeSat for Big Data | M Tursuniyaz, R Martineau, R Baktur, C Swenson | 2017 | JS-B40G | Tursunniyaz, Muhammadeziz & Martinau, Ryan & Altunuc, Serhat & Onuma, Eleanya & Shaw, Harry & Shelton, Marta, “A Clear Antenna on CubeSat for Big Data,” 31st Annual AIA A/USU Conference on Small Satellites , 2017 pp 1-5. |
| Microfluidic platform for seawater desalination by coulometric removal of chloride ions through printed Ag electrodes | M. Fighera ; P. D. van der Wal ; H. Shea | 2017 | HPS-021LV | Fighera, Marianna & Wal, P. & Shea, H.. (2017). Microfluidic Platform for Seawater Desalination by Coulometric Removal of Chloride Ions through Printed Ag Electrodes. Journal of The Electrochemical Society. 164. H836-H845. 10.1149/2.1761712jes. |
| Inkjet printed fully-passive body-worn wireless sensors for smart and connected community (SCC) | Md Juber Rahman ; Bashir I. Morshed ; Sharmin Afroz ; Brook E. Harmon ; Md Sabbir Bin Zaman | 2017 | JS-B40G | Morshed, Bashir & Harmon, Brook & Zaman, Md Sabbir Bin & Rahman, Md Juber & Afroz, Sharmin & Rahman, Mamunur. (2017). Inkjet Printed Fully-Passive Body-Worn Wireless Sensors for Smart and Connected Community (SCC). Journal of Low Power Electronics and Applications. 7. 26. 10.3390/jlpea7040026. |
| Inkjet printing of polymer functionalized CNT gas sensor with enhanced sensing properties | Abdullah S. Alshammari ; Mohammad R. Alenezi ; K.T. Lai ; S. R. P. Silva | 2017 | JS-B15P | Alshammari, Abdullah & Alenezi, Mohammad & Lai, K.T. & Silva, S Ravi. (2016). Inkjet printing of polymer functionalized CNT gas sensor with enhanced sensing properties. Materials Letters. 189. 10.1016/j.matlet.2016.11.033. |
| Development of bendable strain sensor with embedded microchannels using 3D printing | Shweta Agarwala ; Guo Liang Goh ; Yee Ling Yap ; Guo Dong Goh ; Hao Yu | 2017 | JS-B25HV | Agarwala, Shweta & Guo Liang, Goh & Yap, Yee Ling & Goh, Guo Dong & Yu, Hao & Yeong, Wai Yee & Tran, Tuan. (2017). Development of Bendable Strain Sensor with Embedded Microchannels using 3D Printing. Sensors and Actuators A: Physical. 263. 10.1016/j.sna.2017.07.025. |
| Very low-cost inkjet-printed metamaterials: progress and challenges | Hande Ibili ; Ozgur Ergul | 2017 | JS-B25P | Ibili, Hande & Ergul, Ozgur. (2017). Very low-cost inkjet-printed metamaterials: Progress and challenges. 1-3. 10.1109/IMWS-AMP.2017.8247368. |
| A hybrid, networked, wireless system for humidity sensing | Charilaos Mousoulis ; Xiaofan Jiang ; Nithin Raghunathan ; Dimitrios Peroulis | 2017 | JS-B25HV | Mousoulis, Charilaos & Jiang, Xiaofan & Raghunathan, Nithin & Peroulis, Dimitrios. (2017). A hybrid, networked, wireless system for humidity sensing. 1-3. 10.1109/ICSENS.2017.8234185. |
| Improving performance and cyclability of printed flexible zinc-air batteries using carbopol gel electrolyte | Soorathep Kheawhom ; Sunida Chaduang ; Woranunt Lao-atiman | 2017 | PSI-219 | Chaduang, Sunida & Laoatiman, Woranunt & Kheawhom, Soorathep. (2017). Improving Performance and Cyclability of Printed Flexible Zinc-Air Batteries Using Carbopol Gel Electrolyte. ECS Transactions. 77. 55-62. 10.1149/07701.0055ecst. |
| Chemical gas sensor based on a novel capacitive microwave flexible transducer and composite polymer carbon nanomaterials | Prince Bahoumina ; Hamida Hallil ; Aymen Abdelghani ; Kamel Frigui ; Jean-Luc Lachaud | 2017 | JS-B25HV | Bahoumina, Prince & Hallil, Hamida & Lachaud, Luc & Abdelghani, Aymen & Frigui, Kamel & Bila, Stéphane & Baillargeat, Dominique & Zhang, Qing & Coquet, Philippe & Paragua, Carlos & Pichonat, E. & Happy, H. & Rebiere, Dominique & Dejous, Corinne. (2018). Chemical gas sensor based on a novel capacitive microwave flexible transducer and composite polymer carbon nanomaterials. |
| Marked object recognition multitouch screen printed touchpad for interactive applications | Jivago Serrado Nunes ; Nelson Castro ; Sergio Gonçalves ; Nélson Pereira ; Vitor Correia | 2017 | HPS-021LV | Nunes, Jivago & Castro, Nélson & Gonçalves, Sergio & Pereira, Nelson & Correia, Vitor & Lanceros-Méndez, Senentxu. (2017). Marked Object Recognition Multitouch Screen Printed Touchpad for Interactive Applications. Sensors. 17. 2786. 10.3390/s17122786. |
| Design and fabrication of low-cost inkjet-printed metamaterials | Hande Ibili ; Ozgur Ergul ; Bariscan Karaosmanoglu | 2017 | JS-B25P | Ibili, Hande & Karaosmanoglu, Bariscan & Ergul, Ozgur. (2017). Design and fabrication of low-cost inkjet-printed metamaterials. 1-6. 10.1109/EMCT.2017.8090352. |
| Inkjet‐printed 3 DH ilbert‐curve fractal antennas for VHF band | Muhammad Usman Memon ; Manos M. Tentzeris ; Sungjoon Lim | 2017 | JS-B25P | Memon, M. Usman & Tentzeris, Manos & Lim, Sungjoon. (2017). Inkjet-printed 3D Hilbert-curve fractal antennas for VHF band. Microwave and Optical Technology Letters. 59. 1698-1704. 10.1002/mop.30613. |
| Transformation from a single antenna to a series array using push/pull origami | Syed Imran Hussain Shah ; Sungjoon Lim | 2017 | JS-B25P | Shah, Syed & Lim, Sungjoon. (2017). Transformation from a Single Antenna to a Series Array Using Push/Pull Origami. Sensors (Basel, Switzerland). 17. 10.3390/s17091968. |
| Optimization and characterization of a capillary contact micro-plotter for printed electronic devices | Akanksha Rohit | 2017 | JS-B40G | Rohit, Akanksha. (2017). Optimization and Characterization of a Capillary Contact Micro-Plotter for Printed Electronic Devices. |
| Organic thermoelectric devices based on a stable n-type nanocomposite printed on paper | Salim Ferhat ; Christophe Domain ; Julien Vidal ; Didier Noël ; Bernad Ratier | 2017 | PFI-4101 | Ferhat, Salim & Domain, Christophe & Vidal, Julien & Noël, Didier & Ratier, Bernad & Lucas, Bruno. (2017). Organic thermoelectric device based on a stable n-type nanocomposite printed on paper.. Sustainable Energy Fuels. 2. 10.1039/C7SE00313G. |
2016
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| Fabrication of conductive paths on a fused deposition modeling substrate using inkjet deposition | Wenchao Zhou, Frederick A List, Chad E Duty & Sudarsanam S Babu | 2016 | JS-B25HV | Zhou, W., List, F.A., Duty, C.E. and Babu, S.S. (2016), “Fabrication of conductive paths on a fused deposition modeling substrate using inkjet deposition”, Rapid Prototyping Journal, Vol. 22 No. 1, pp. 77-86. https://doi.org/10.1108/RPJ-05-2014-0070 |
| Dipole-and loop-mode transformable origami paper antenna | Dongju Lee, Yunsik Seo & Sungjoon Lim | 2016 | JS-B25P | Lee, Dongju & Seo, Yunsik & Lim, Sungjoon. (2016). Dipole- and Loop-Mode Transformable Origami Paper Antenna. The Journal of Korean Institute of Electromagnetic Engineering and Science. 27. 8-13. 10.5515/KJKIEES.2016.27.1.8. |
| Inkjet printed wearable Hilbert monopole fractal antenna optimized for BAN systems | Mustafa M. Roushdy ; Hany F. Hammad | 2016 | JS-B25HV | M. M. Roushdy and H. F. Hammad, “Inkjet printed wearable Hilbert monopole fractal antenna optimized for BAN systems,” 2016 33rd National Radio Science Conference (NRSC), Aswan, 2016, pp. 102-108, doi: 10.1109/NRSC.2016.7450817. |
| A study on the thermal sintering process of silver nanoparticle inkjet inks to achieve smooth and highly conducting silver layers | Glen Vandevenne ; Wouter Marchal ; Inge Verboven ; Jeroen Drijkoningen ; Jan D’Haen ; Marlies K. Van Bael ; An Hardy ; Wim Deferme | 2016 | JS-B30G | Vandevenne, Glen & Marchal, Wouter & Verboven, Inge & Drijkoningen, Jeroen & D’Haen, Jan & Van Bael, Marlies & Hardy, An & Deferme, Wim. (2016). A study on the thermal sintering process of silver nanoparticle inkjet inks to achieve smooth and highly conducting silver layers. physica status solidi (a). 213. n/a-n/a. 10.1002/pssa.201533007. |
| Inkjet printing and photonic sintering of silver and copper oxide nanoparticles for ultra-low-cost conductive patterns | Andreas Albrecht, Almudena Rivadeneyra, Alaa Abdellah, Paolo Luglia and José F. Salmerón | 2016 | ICI-002HV | Albrecht, Andreas & Rivadeneyra, Almudena & Abdellah, Alaa & Lugli, Paolo & F. Salmerón, José. (2016). Inkjet Printing and Photonic Sintering of Silver and Copper Oxide Nanoparticles for Ultra-Low-Cost Conductive Patterns. J. Mater. Chem. C. 4. 10.1039/C6TC00628K. |
| Additive manufacturing of antennas from copper oxide nanoparticle ink: Toward low-cost RFID tags on paper-and textile-based platforms | Erja Sipila, Jun Liu, Jianhua Wang, Johanna Virkki, Toni Bjorninen, Lianglun Cheng, Lauri Sydanheimo, Leena Ukkonen | 2016 | ICI-021 | Sipila, Erja & Liu, Jun & Wang, Jianhua & Virkki, Johanna & Björninen, Toni & Cheng, Lianglun & Sydänheimo, Lauri & Ukkonen, Leena. (2016). Additive manufacturing of antennas from copper oxide nanoparticle ink: Toward low-cost RFID tags on paper- and textile-based platforms. 1-4. 10.1109/EuCAP.2016.7481676. |
| An all-inkjet printed bending actuator with embedded sensing feature and an electromagnetic driving mechanism | Bruno Andò ; Vincenzo Marletta | 2016 | JS-B15P | Andò, Bruno & Marletta, Vincenzo. (2016). An All-InkJet Printed Bending Actuator with Embedded Sensing Feature and an Electromagnetic Driving Mechanism. Actuators. 5. 21. 10.3390/act5030021. |
| Brush-painting and photonic sintering of copper oxide and silver inks on wood and cardboard substrates to form antennas for UHF RFID tags | Erja Sipilä, Johanna Virkki, Jianhua Wang, Lauri Sydänheimo, and Leena Ukkonen | 2016 | HPS-021LV | Sipilä, Erja & Virkki, Johanna & Wang, Jianhua & Sydänheimo, Lauri & Ukkonen, Leena. (2016). Brush-Painting and Photonic Sintering of Copper Oxide and Silver Inks on Wood and Cardboard Substrates to Form Antennas for UHF RFID Tags. International Journal of Antennas and Propagation. 2016. 1-8. 10.1155/2016/3694198. |
| A reliability study of coating materials for brush-painted washable textile RFID tags | Aitzaz Kazmi ; Muhammad Rizwan ; Lauri Sydänheimo ; Leena Ukkonen ; Johanna Virkki | 2016 | HPS-021LV | Kazmi, Aitzaz & Rizwan, M. & Sydänheimo, Lauri & Ukkonen, Leena & Virkki, Johanna. (2016). A Reliability Study of Coating Materials for Brush-painted Washable Textile RFID Tags. 10.1109/ESTC.2016.7764735. |
| Experimental study on brush-painted passive RFID-based humidity sensors embedded into plywood structures | Erja Sipilä, Johanna Virkki, Lauri Sydänheimo, and Leena Ukkonen | 2016 | ICI-021 | Sipilä, Erja & Virkki, Johanna & Sydänheimo, Lauri & Ukkonen, Leena. (2016). Experimental Study on Brush-Painted Passive RFID-Based Humidity Sensors Embedded into Plywood Structures. International Journal of Antennas and Propagation. 2016. 1-8. 10.1155/2016/1203673. |
| An inkjet printed, roll-coated digital microfluidic device for inexpensive, miniaturized diagnostic assays | Christopher Dixon, Alphonsus H. C. Ng, Ryan Fobel, Mark B. Miltenburga and Aaron R. Wheeler | 2016 | JS-B25P | Dixon C, Ng AH, Fobel R, Miltenburg MB, Wheeler AR. An inkjet printed, roll-coated digital microfluidic device for inexpensive, miniaturized diagnostic assays. Lab on a Chip. 2016 Nov;16(23):4560-4568. DOI: 10.1039/c6lc01064d. |
| Reliability of Passive UHF RFID Copper Tags on Plywood Substrate in High Humidity Conditions | Erja Sipilä, Johanna Virkki, Lauri Sydänheimo & Leena Ukkonen | 2016 | ICI-021 | Sipilä, Erja & Virkki, Johanna & Sydänheimo, Lauri & Ukkonen, Leena. (2016). Reliability of Passive UHF RFID Copper Tags on Plywood Substrate in High Humidity Conditions. Additional Conferences (Device Packaging, HiTEC, HiTEN, & CICMT). 2016. 12-16. 10.4071/2016-NOR-Sipila. |
| Study on a telemetrie system that works with an inkjet-printed resistive strain gauge | M. Bona ; E. Sardini ; M. Serpelloni ; B. Andò ; C. O. Lombardo | 2016 | JS-015 | M. Bona, E. Sardini, M. Serpelloni, B. Andò and C. O. Lombardo, “Study on a telemetrie system that works with an inkjet-printed resistive strain gauge,” 2016 IEEE Sensors Applications Symposium (SAS), Catania, 2016, pp. 1-6, doi: 10.1109/SAS.2016.7479869. |
| Telemetric technique for wireless strain measurement from an inkjet-printed resistive sensor | Michele Bona ; Mauro Serpelloni ; Emilio Sardini ; Cristian O. Lombardo ; Bruno Andò | 2016 | JS-015 | Bona, Michele & Serpelloni, Mauro & Sardini, Emilio & Lombardo, Cristian & Bruno,. (2016). Telemetric Technique for Wireless Strain Measurement From an Inkjet-Printed Resistive Sensor. IEEE Transactions on Instrumentation and Measurement. PP. 1-9. 10.1109/TIM.2016.2607958. |
| Compact inkjet-printed broadband filtennas with triple bandnotch | Waqas Ahmad ; Djuradj Budimir ; Cedo Zlebic | 2016 | JS-B25HV | Ahmad, Waqas & Budimir, Djuradj & Zlebic, Cedo. (2016). Compact inkjet-printed broadband filtennas with triple bandnotch. 80-83. 10.1109/EuMC.2016.7824282. |
| Which electrode materials to select for more environmentally friendly organic photovoltaics? | Nieves Espinosa ; Alexis Laurent ; Gisele A. dos Reis Benatto ; Markus Hösel ; Frederik C. Krebs | 2016 | PFI-722, ICI-021 | Espinosa, Nieves & Laurent, Alexis & Benatto, Gisele & Hösel, Markus & Krebs, Frederik. (2016). Which Electrode Materials to Select for More Environmentally Friendly Organic Photovoltaics?. Advanced Engineering Materials. 18. 490-495. 10.1002/adem.201500509. |
| Inkjet printed resistive strain gages on flexible substrates | Cedo Zlebic ; Ljiljana Zivanov ; Aleksandar B. Menicanin ; Nelu Blaz ; Mirjana Damnjanovic | 2016 | JS-B15P | Zlebic, Cedo & Zivanov, Ljiljana & Menicanin, Aleksandar & Blaz, Nelu & Damnjanovic, Mirjana. (2016). Inkjet printed resistive strain gages on flexible substrates. Facta universitatis – series: Electronics and Energetics. 29. 89-100. 10.2298/FUEE1601089Z. |
| Inkjet printing and photonic sintering of silver and copper oxide nanoparticles for ultra-low-cost conductive patterns | Andreas Albrecht ; Almudena Rivadeneyra ; Alaa Abdellah ; Paolo Lugli ; José F. Salmerón | 2016 | ICI-002HV | Albrecht, Andreas & Rivadeneyra, Almudena & Abdellah, Alaa & Lugli, Paolo & F. Salmerón, José. (2016). Inkjet Printing and Photonic Sintering of Silver and Copper Oxide Nanoparticles for Ultra-Low-Cost Conductive Patterns. J. Mater. Chem. C. 4. 10.1039/C6TC00628K. |
| Fabrication of microstrip patch antenna using novel hybrid printing technology | Syed Imran Hussain Shah ; Dongju Lee ; Manos M. Tentzeris ; Sungjoon Lim | 2016 | JS-B25P | Shah, Syed & Lee, Dongju & Tentzeris, Manos & Lim, Sungjoon. (2016). Fabrication of microstrip patch antenna using novel hybrid printing technology. Microwave and Optical Technology Letters. 58. 2602-2606. 10.1002/mop.30110. |
| Dipole‐and loop‐mode switchable origami paper antenna | Sungjoon Lim ; Dongju Lee ; Yunsik Seo | 2016 | JS-B25P | Lee, Dongju & Seo, Yunsik & Lim, Sungjoon. (2016). Dipole- And loop-mode switchable origami paper antenna. Microwave and Optical Technology Letters. 58. 668-672. 10.1002/mop.29647. |
| 3D printing of microfludic sensor for soft robots: a preliminary study in design and fabrication | Goh Guo Liang ; Shweta Agarwala ; Wai Yee Yeong | 2016 | JS-B25HV | Guo Liang, Goh & Agarwala, Shweta & Yeong, Wai Yee. (2019). 3D printing of microfludic sensor for soft robots: a preliminary study in design and fabrication. 10.3850/2424-8967. |
| Low-cost inkjet printed passive booster for increasing the magnetic coupling in proximity of metal object for NFC systems | Hossein Saghlatoon ; Mohammad Mahdi Honari ; Pedram Mousavi ; Rashid Mirzavand Boroujeni | 2016 | JS-B40G | Saghlatoon, Hossein & Mirzavand, Rashid & Honari, Mohammad Mahdi & Mousavi, Pedram. (2016). Low-Cost Inkjet Printed Passive Booster for Increasing the Magnetic Coupling in Proximity of Metal Object for NFC Systems. IEEE Microwave and Wireless Components Letters. PP. 1-3. 10.1109/LMWC.2016.2623243. |
| 3D printing of microfludic sensor for soft robots: a preliminary study in design and fabrication | Goh Guo Liang ; Shweta Agarwala ; Wai Yee Yeong | 2016 | JS-B25HV | Guo Liang, Goh & Agarwala, Shweta & Yeong, Wai Yee. (2019). 3D printing of microfludic sensor for soft robots: a preliminary study in design and fabrication. 10.3850/2424-8967. |
| Integration of Miniature Electronic Assemblies Using Nanoparticle Silver Conductors, Polymer Bump Connections, and Encapsulated Component Blocks | C. Paul Christensen ; Natalya Christensen | 2016 | PFI-722 | Christensen, Paul & Christensen, Natalya. (2016). Integration of Miniature Electronic Assemblies Using Nanoparticle Silver Conductors, Polymer Bump Connections, and Encapsulated Component Blocks. IEEE Transactions on Components, Packaging and Manufacturing Technology. 6. 1-6. 10.1109/TCPMT.2016.2539928. |
| Inversion of temperature-resistance relationship by enlarged structural defects in graphene oxide | Eric P. Boon; Linh T. Le ; Woo Y. Lee | 2016 | JS-B40G | Boon, Eric & Le, Linh & Lee, Woo. (2016). Inversion of Temperature-Resistance Relationship by Enlarged Structural Defects in Graphene Oxide. Carbon. 102. 10.1016/j.carbon.2016.02.010. |
| Self-powered wireless affinity-based biosensor based on integration of paper-based microfluidics and self-assembled RFID antennas | Mingquan Yuan ; Shantanu Chakrabartty ; Evangelyn C. Alocilja | 2016 | JS-B25P | Yuan, Mingquan & Alocilja, Evangelyn & Chakrabartty, Shantanu. (2016). Self-Powered Wireless Affinity-Based Biosensor Based on Integration of Paper-Based Microfluidics and Self-Assembled RFID Antennas. IEEE Transactions on Biomedical Circuits and Systems. 10. 10.1109/TBCAS.2016.2535245. |
2015
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| Potential for multi-functional additive manufacturing using pulsed photonic sintering | Sourav Das; Denis Cormier; Scott Williams | 2015 | ICI-021 | Sourav Das, Denis Cormier, Scott Williams, Potential for Multi-functional Additive Manufacturing Using Pulsed Photonic Sintering, Procedia Manufacturing, Volume 1, 2015, Pages 366-377, ISSN 2351-9789, https://doi.org/10.1016/j.promfg.2015.09.043. |
| An inkjet printed CO2 gas sensor | B.Andò; S.Baglio; G.Di Pasquale; A.Pollicino; S.D’Agata; C.Gugliuzzo; C. Lombardo; G.Rea | 2015 | JS-B15P | Andò, B. & Baglio, Salvo & Pasquale, Giovanna & Pollicino, Antonino & D’Agata, S. & Gugliuzzo, C. & Lombardo, C. & Re, G.. (2015). An inkjet printed CO2 gas sensor. Procedia Engineering. 120. 628-631. 10.1016/j.proeng.2015.08.755. |
| Pulsed Photonic Curing of Conformal Printed Electronics | Sourav Das | 2015 | ICI-021 | Das, S. (2015). Pulsed Photonic Curing of Conformal Printed Electronics. |
| Fully inkjet printed CPW meander inductors on PET flexible substrate | Aleksandar Menicanin ; Ljiljana Živanov ; Čedo Žlebič ; Milica Kisić ; Nelu Blaž ; Mirjana Damnjanović | 2015 | JS-B25HV | A. Menicanin, L. Živanov, Č. Žlebič, M. Kisić, N. Blaž and M. Damnjanović, “Fully inkjet printed CPW meander inductors on PET flexible substrate,” 2015 38th International Spring Seminar on Electronics Technology (ISSE), Eger, 2015, pp. 43-46, doi: 10.1109/ISSE.2015.7247959. |
| Conductive Inkjet Printed Ultra-Wideband (UWB) Planar Monopole Antenna on Low-Cost Flexible Polyethylene Terephthalate (PET) Substrate Material | Daria Lane, Alejandro Castro & Sk Sharma | 2015 | JS-B25P | Lane, Daria & Castro, Alejandro & Sharma, Sk. (2015). Conductive inkjet printed ultra-wideband (UWB) planar monopole antenna on low cost flexible PET substrate material. 1958-1959. 10.1109/APS.2015.7305368. |
| Impact of Calendering and Silver Addition to Carbon Nanotube-Based Electrodes Used in Printed Multi-Layer Capacitors | Ramea Awni Al-Mubarak | 2015 | HPS-021LV | Al-Mubarak, R. (2015) Impact of Calendering and Silver Addition to Carbon NanotubeBased Electrodes Used in Printed Multi-Layer Capacitors. |
| 3-D antenna structures using novel direct-write additive manufacturing method | Taibur Rahman, Rahul Panat, Deuk Heo | 2015 | HPS-030AE1 | Rahman, Taibur & Panat, Rahul & Heo, Deukhyoun. (2015). 3-D Antenna Structures Using Novel Direct-Write Additive Manufacturing Method. V003T03A002. 10.1115/IPACK2015-48187. |
| Flexible inkjet printed CPW octagonal inductor on PET substrate | Aleksandar Menicanin ; Ljiljana Živanov ; Nelu Blaž ; Mirjana Damnjanović ; Čedo Žlebič ; Milica Kisić | 2015 | JS-B25HV | Menicanin, Aleksandar & Zivanov, Ljiljana & Blaz, Nelu & Damnjanovic, Mirjana & Zlebic, Cedo & Kisic, Milica. (2015). Flexible inkjet printed CPW octagonal inductor on PET substrate. 40-42. 10.1109/ISSE.2015.7247958. |
| Nonlinear snap-through-buckling devices for energy harvesting from vibrations | Bruno Ando’, Salvatore Baglio, Vincenzo Marletta, Elisa Pergolizzi, Vittorio Ferrari, Marco Ferrari & Adi R. Bulsara | 2015 | JS-B15P | Ando’, Bruno & Baglio, Salvo & Marletta, Vincenzo & Pergolizzi, Elisa & Ferrari, Vittorio & Ferrari, Marco & Bulsara, Adi. (2015). Nonlinear Snap-Through-Buckling Devices for Energy Harvesting from Vibrations. 10.1007/978-3-319-09617-9_72. |
| A low-cost accelerometer developed by inkjet printing technology | Bruno Ando’, Salvo Baglio, Cristian Lombardo, Vincenzo Marletta & Antonio Pistorio | 2015 | JS-015 | Ando, Bruno & Baglio, Salvo & Lombardo, Cristian & Marletta, Vincenzo & Pistorio, Antonio. (2015). A Low-Cost Accelerometer Developed by Inkjet Printing Technology. IEEE Transactions on Instrumentation and Measurement. 65. 1-7. 10.1109/TIM.2015.2490998. |
| Fully printed metabolite sensor using organic electrochemical transistor | Gaëtan Scheiblin, Abdelkader Aliane, Romain Coppard, Róisín M. Owens, Pascal Mailley, George G. Malliaras | 2015 | HPS-021LV | Scheiblin, Gaëtan & Aliane, A. & Coppard, Romain & Owens, Roisin & Mailley, Pascal & Malliaras, George. (2015). Fully printed metabolite sensor using organic electrochemical transistor. 95681E. 10.1117/12.2186385. |
| An inkjet printed seismic sensor | Bruno Ando’, Salvo Baglio, Cristian Lombardo, Vincenzo Marletta & Antonio Pistorio | 2015 | JS-015 | Ando, B. & Baglio, Salvo & Lombardo, C.O. & Marletta, Vincenzo & Pistorio, Antonio. (2015). An inkjet printed seismic sensor. Conference Record – IEEE Instrumentation and Measurement Technology Conference. 2015. 1169-1173. 10.1109/I2MTC.2015.7151437. |
| Brush-painted silver UHF RFID tags on environmental-friendly and flexible substrates | Yanan Ren ; Johanna Virkki ; Lauri Sydänheimo ; Leena Ukkonen ; Yan-Cheong Chan | 2015 | HPS-021LV | Ren, Yanan & Virkki, Johanna & Sydänheimo, Lauri & Ukkonen, Leena & Chan, Yan-Cheong. (2015). Brush-painted silver UHF RFID tags on environmental-friendly and flexible substrates. 1314-1315. 10.1109/APS.2015.7305046. |
| Strain sensors in wearable devices | M. Farooq & E. Sazonov | 2015 | JS-B15P | Farooq, Muhammad & Sazonov, Edward. (2015). Strain Sensors in Wearable Devices. 10.1007/978-3-319-18191-2_9. |
| Flash processing of copper electrodes printed from copper oxide nanoparticle ink | Francesco Paglia | 2015 | ICI-002HV | Paglia, F. (2015). Flash processing of copper electrodes printed from copper oxide nanoparticle ink. |
| Low cost inkjet printing for the fast prototyping of surface EMG detection systems | Gazzoni Marco | 2015 | JS-B15P | G. Marco, “Low cost inkjet printing for the fast prototyping of surface EMG detection systems,” 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA) Proceedings, Turin, 2015, pp. 79-83, doi: 10.1109/MeMeA.2015.7145176. |
| Ultra-Low-Cost and Rapid Production of Inkjet-Printed Conductive Patterns using Silver Inks and Copper Oxide Inks | Andreas Albrecht | 2015 | ICI-002HV | Albrecht, Andreas. (2015). Ultra-Low-Cost and Rapid Production of Inkjet-Printed Conductive Patterns using Silver Inks and Copper Oxide Inks. |
| Flexible inkjet-printed metamaterial absorber for coating a cylindrical object | Sungjoon Lim ; Kenyu Ling ; Kyeongseob Kim ; Hyung Ki Kim | 2015 | JS-B25P | Kim, Hyung Ki & Ling, Kenyu & Kim, Kyeongseob & Lim, Sungjoon. (2015). Flexible inkjet-printed metamaterial absorber for coating a cylindrical object. Optics Express. 23. 10.1364/OE.23.005898. |
| UV-nanoimprint lithography as a tool to develop flexible microfluidic devices for electrochemical detection | Fei He ; Vincent M Rotello ; Juhong Chen ; Yiliang Zhou ; Danhui Wang | 2015 | JS-B30G | Chen, Juhong & Zhou, Yiliang & Wang, Danhui & He, Fei & Rotello, Vincent & Carter, Kenneth & Watkins, James & Nugen, Sam. (2015). UV-nanoimprint lithography as a tool to develop flexible microfluidic devices for electrochemical detection. Lab on a chip. 15. 10.1039/c5lc00515a. |
| IMPROVED RESISTIVE STRAIN GAGE PRINTED ON FLEXIBLE SUBSTRATE | Čedo Žlebič, Ljiljana Živanov, Nelu Blaž, Aleksandar Menićanin, Mirjana Damnjanović | 2015 | JS-B15P | Zlebic, Cedo & Zivanov, Ljiljana & Menicanin, Aleksandar & Blaz, Nelu & Damnjanovic, Mirjana. (2016). Improved Resistive Strain Gage Printed on Flexible Substrate. |
| Printed module interconnects | Talysa R. Stockert ; Jeremy D. Fields ; Gregory F. Pach ; Scott A. Mauger ; Maikel F.A.M. van Hest | 2015 | HPS-030AE1 | T. R. Stockert, J. D. Fields, G. F. Pach, S. A. Mauger and M. F. A. M. van Hest, “Printed module interconnects,” 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC), New Orleans, LA, 2015, pp. 1-4, doi: 10.1109/PVSC.2015.7356284. |
| Printing transparent grid patterns with conductive silver ink with flexography | Colleen Twomey , Xiaoying Rong , Liam O’Hara , Charles Tonkin , Malcolm Keif | 2015 | PFI-722 | Twomey, Colleen & Rong, Xiaoyin & O’Hara Liam & Tonkin, Charles & Keif, Malcolm. (2015). “Printing Transparent Grid Patterns with Conductive Silver Ink with Flexography,” TAGA 2015 Technical Association of the Graphic Arts Proceedings, Albequerque, NM, pp. 62-76. |
| Nanomaterials for Ink-Jet Printed Electronics | Rostyslav Lesyuk ; H. Petrowska ; Oleksandr Kravchuk ; Yaroslav Bobitski ; B. Kotlyarchuk | 2015 | ICI-003 | Lesyuk, Rostyslav & Petrowska, H. & Kravchuk, Oleksandr & Bobitski, Yaroslav & Kotlyarchuk, B.. (2015). Nanomaterials for Ink-Jet Printed Electronics. 10.1007/978-3-319-18543-9_31. |
| Manufacturing of antennas for passive UHF RFID tags by direct write dispensing of copper and silver inks on textiles | Johanna Virkki ; Lauri Sydänheimo ; Toni Björninen ; Leena Ukkonen | 2015 | HPS-021LV, ICI-021 | Björninen, Toni & Virkki, Johanna & Sydänheimo, Lauri & Ukkonen, Leena. (2015). Manufacturing of antennas for passive UHF RFID tags by direct write dispensing of copper and silver inks on textiles. 10.1109/ICEAA.2015.7297183. |
| Pattern switchable antenna system using inkjet-printed directional bow-tie for bi-direction sensing applications | Seung-Hyun Eom ; Sungjoon Lim ; Yunsik Seo | 2015 | JS-B25P | Eom, Seung-Hyun & Seo, Yunsik & Lim, Sungjoon. (2015). Pattern Switchable Antenna System Using Inkjet-Printed Directional Bow-Tie for Bi-Direction Sensing Applications. Sensors. 15. 31171-31179. 10.3390/s151229851. |
| Fully printed metabolite sensor using organic electrochemical transistor | Gaëtan Scheiblin ; A. Aliane ; R. Coppard ; Róisín M. Owens ; Pascal Mailley | 2015 | HPS-021LV | Scheiblin, Gaëtan & Aliane, A. & Coppard, Romain & Owens, Roisin & Mailley, Pascal & Malliaras, George. (2015). Fully printed metabolite sensor using organic electrochemical transistor. 95681E. 10.1117/12.2186385. |
| Self-powered wireless biosensing based on integration of paper-based microfluidics with self-assembling RFID antennas | Mingquan Yuan ; Shantanu Chakrabartty ; Evangelyn C. Alocilja | 2015 | JS-B25P | Yuan, Mingquan & Alocilja, Evangelyn & Chakrabartty, Shantanu. (2015). Self-powered Wireless Biosensing based on Integration of Paper-based Microfluidics with Self-assembling RFID Antennas. 10.1109/BioCAS.2015.7348388. |
| Impact of crystallization on ferro-, piezo-and pyro-electric characteristics in thin film P (VDF-TrFE) | A. Aliane ; M. Benwadih ; Benjamin Bouthinon ; R. Coppard ; Fabrice Domingues Dos Santos | 2015 | HPS-021 | Aliane, A. & Benwadih, M. & Bouthinon, B. & Coppard, R. & domingues dos santos, Fabrice & Daami, A.. (2015). Impact of crystallization on ferro-, piezo- and pyro-electric characteristics in thin film P(VDF-TrFE). Organic Electronics. 25. 10.1016/j.orgel.2015.06.007. |
2014
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| p3D Micro Dispensing & Photonic Curing of Silver Nanoparticle Inks on Low Thermal Stability Molded Plastic Parts | M Mastropietro, I Rawson, V Akhavan, X Chen, K Church | 2014 | PXI-220-5 | Mastropietro, Michael & Rawson, Ian & Akhavan, Vahid & Chen, Xudong & Church, Ken. (2014). p3D Micro Dispensing & Photonic Curing of Silver Nanoparticle Inks on Low Thermal Stability Molded Plastic Parts. International Symposium on Microelectronics. 2014. 000882-000886. 10.4071/isom-THP51. |
| Rapid prototyping of resistive MEMS sensing devices on paper substrates | Thorsten Meiss ; Roland Wertschützky ; Boris Stoeber | 2014 | JS-B25P | T. Meiss, R. Wertschützky and B. Stoeber, “Rapid prototyping of resistive MEMS sensing devices on paper substrates,” 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), San Francisco, CA, 2014, pp. 536-539, doi: 10.1109/MEMSYS.2014.6765696. |
| A low-cost snap-through-buckling inkjet-printed device for vibrational energy harvesting | Bruno Andò ; Salvatore Baglio ; Adi R. Bulsara ; Vincenzo Marletta ; Vittorio Ferrari ; Marco Ferrari | 2014 | JS-B15P | B. Andò, S. Baglio, A. R. Bulsara, V. Marletta, V. Ferrari and M. Ferrari, “A Low-Cost Snap-Through-Buckling Inkjet-Printed Device for Vibrational Energy Harvesting,” in IEEE Sensors Journal, vol. 15, no. 6, pp. 3209-3220, June 2015, doi: 10.1109/JSEN.2014.2386392. |
| A contactless inkjet printed passive touch sensor | B. Andò ; S. Baglio ; V. Marletta ; A. Pistorio | 2014 | JS-015 | B. Andò, S. Baglio, V. Marletta and A. Pistorio, “A contactless inkjet printed passive touch sensor,” 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, Montevideo, 2014, pp. 1638-1642, doi: 10.1109/I2MTC.2014.6861023. |
| SEMI-CONTACT WRITING TECHNOLOGY & APPLICATIONS | Ludwig Gutzweiler ; Tobias Gleichmann ; Peter Kolaty ; Roland Zengerle ; L. Riegger | 2014 | JS-B25HV | Gutzweiler, Ludwig & Gleichmann, Tobias & Koltay, Peter & Zengerle, Roland & Riegger, L.. (2014). Semi-contact writing technology & applications. |
| A Disposable Ammonia Sensor by Low-Cost Ink-Jet Printing Technology | Bruno Andò ; Salvo Baglio ; Giovanna Pasquale ; Cristian O. Lombardo ; V. Marletta | 2014 | JS-015 | Andò, B. & Baglio, Salvo & Pasquale, Giovanna & Lombardo, C.O. & Marletta, Vincenzo. (2014). A Disposable Ammonia Sensor by Low-Cost Ink-Jet Printing Technology. Lecture Notes in Electrical Engineering. 268. 133-137. 10.1007/978-3-319-00684-0-25. |
| Textile manufacturing techniques in RF devices | Shiyu Zhang ; Rob Seager ; Alford Chauraya ; William Whittow ; Yiannis Vardaxoglou | 2014 | HPS-021LV | S. Zhang, R. Seager, A. Chauraya, W. Whittow and Y. Vardaxoglou, “Textile manufacturing techniques in RF devices,” 2014 Loughborough Antennas and Propagation Conference (LAPC), Loughborough, 2014, pp. 182-186, doi: 10.1109/LAPC.2014.6996351. |
| An inkjet printed sensor for load measurement | Bruno Andò ; Salvatore Baglio ; Cristian O. Lombardo ; V. Marletta | 2014 | JS-015 | B. Andò, S. Baglio, C. O. Lombardo and V. Marletta, “An inkjet printed sensor for load measurement,” 2014 IEEE Sensors Applications Symposium (SAS), Queenstown, 2014, pp. 185-188, doi: 10.1109/SAS.2014.6798943. |
| Photosintering and electrical performance of CuO nanoparticle inks | Chantal Paquet ; Robert James ; Arnold J Kell ; Olga Mozenson ; Julie Ferrigno | 2014 | ICI-002HV | Paquet, Chantal & James, Robert & Kell, Arnold & Mozenson, Olga & Ferrigno, Julie & Lafrenière, Sylvie & Malenfant, Patrick. (2014). Photosintering and electrical performance of CuO nanoparticle inks. Organic Electronics. 15. 1836-1842. 10.1016/j.orgel.2014.05.014. |
| Mechanically Flexiable Biosensor for Detection of Photoplethysography | Kian Davoudi, Moein Shayeganyan, Kouhyar Tavakolian and Bozena Kamisnka | 2014 | JS-B25HV | Davoudi, K., Shayeganyan, M., Tavakolian, K., & Kaminska, B. (2014). Mechanically Flexiable Biosensor for Detection of Photoplethysography. BIODEVICES. |
| Flexible plastic substrate-based inkjet printed CPW resonators for 60 GHz ISM applications | Khelifa Hettak ; Tyler Ross ; Adrian Momciu ; J.S. Wight ; Rob James | 2014 | JS-B25HV | Hettak, Khelifa & Ross, Tyler & James, Rob & Momciu, Adrian & Wight, Jim. (2014). Flexible plastic substrate-based inkjet printed CPW resonators for 60 GHz ISM applications. 1194-1197. 10.1109/EuMC.2014.6986655. |
2013
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| All-inkjet printed strain sensors | Bruno Andò ; Salvatore Baglio | 2013 | JS-B15P | B. Andò and S. Baglio, “All-Inkjet Printed Strain Sensors,” in IEEE Sensors Journal, vol. 13, no. 12, pp. 4874-4879, Dec. 2013, doi: 10.1109/JSEN.2013.2276271. |
| Body-worn antennas making a splash: Lifejacket-integrated antennas for global search and rescue satellite system | Juha Lilja, Vesa Pynttari, Tero Kaija, R. Makinen, Eerik Halonen, Hannu Sillanpaa, Jari Johannes Heikkinen, Matti Mantysalo, Pekka Salonen, Peter de Maagt | 2013 | JS-015 | J. Lilja et al., “Body-Worn Antennas Making a Splash: Lifejacket-Integrated Antennas for Global Search and Rescue Satellite System,” in IEEE Antennas and Propagation Magazine, vol. 55, no. 2, pp. 324-341, April 2013, doi: 10.1109/MAP.2013.6529385. |
| Towards inkjet-printed low cost passive UHF RFID skin mounted tattoo paper tags based on silver nanoparticle inks | Veronica Sanchez-Romaguera, Mohamed A. Ziai, Dumtoochukwu Oyeka, Silvia Barbosa, Joseph S. R. Wheeler, John C. Batchelor, Edward. A. Parker and Stephen G. Yeates | 2013 | JS-B25HV | Sanchez-Romaguera, Veronica & Ziai, mohamad ali & Oyeka, Dumtoo & Barbosa, Silvia & Wheeler, Joseph & Batchelor, John & Parker, E.A. & Yeates, Stephen. (2013). Towards inkjet-printed low cost passive UHF RFID skin mounted tattoo paper tags based on silver nanoparticle inks. Journal of Materials Chemistry. 1. 6395. 10.1039/c3tc31302f. |
| UHF Electromagnetic Structures Inkjet Printed on Temperature Sensitive Substrates: a Comparative Study of Conductive Inks and Sintering Methods to Enable Low Cost Manufacture | Veronica Sanchez-Romaguera, Sebastian Wunscher, Robert Abbel, Mohamed A. Ziai, Dumtoo Oyeka , Badredin Turki , John C Batchelor , E. A. Parker , Ulrich S. Schubert, Stephen G. Yeates, Daniel J. Tate | 2013 | JS-B25HV | Sanchez-Romaguera, Veronica & Wünscher, Sebastian & Abbel, Robert & Ziai, mohamad ali & Oyeka, Dumtoo & Turki, Badredin & Batchelor, John & Parker, E.A. & Schubert, Ulrich & Yeates, Stephen & Tate, Daniel. (2013). UHF Electromagnetic Structures Inkjet Printed on Temperature Sensitive Substrates: a Comparative Study of Conductive Inks and Sintering Methods to Enable Low Cost Manufacture. NIP & Digital Fabrication Conference. 2013. 372-376. |
| Novel developments in photonic sintering of inkjet printed functional inks | Ingo Reinhold , Wolfgang Voit, Ian Rawson, Karl Martin, Devonte Pope, Stan Farnsworth, Werner Zapka, Charles Munson | 2013 | ICI-002HV | Reinhold, Ingo & Voit, Wolfgang & Rawson, Ian & Martin, Karl & Pope, Devonte & Farnsworth, Stan & Zapka, Werner & Munson, Charles. (2013). Novel Developments in Photonic Sintering of Inkjet Printed Functional Inks. NIP & Digital Fabrication Conference. |
| Study of inkjet printing as an ultra-low-cost antenna prototyping method and its application to conformal wraparound antennas for sounding rocket sub-payload | Maimaitirebike Maimaiti | 2013 | JS-B25P | Maimaiti, M. (2013). Study of Inkjet Printing as an Ultra-Low-Cost Antenna Prototyping Method and Its Application to Conformal Wraparound Antennas for Sounding Rocket Sub-Payload. |
| Fabric based frequency selective surfaces using weaving and screen printing | R.D. Seager ; A. Chauraya ; J. Bowman ; M. Broughton ; R. Philpott ; N. Nimkulrat | 2013 | HPS-021LV | R. D. Seager, A. Chauraya, J. Bowman, M. Broughton, R. Philpott and N. Nimkulrat, “Fabric based frequency selective surfaces using weaving and screen printing,” in Electronics Letters, vol. 49, no. 24, pp. 1507-1509, 21 November 2013, doi: 10.1049/el.2013.2314. |
| Inkjet printed circularly polarized patch antenna on a cylindrical surface | Maimaitirebike Maimaiti ; Reyhan Baktur | 2013 | JS-B25P | M. Maimaiti and R. Baktur, “Inkjet printed circularly polarized patch antenna on a cylindrical surface,” 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI), Orlando, FL, 2013, pp. 1854-1855, doi: 10.1109/APS.2013.6711585. |
| Flexible polyethylene terephthalate-based inkjet printed CPW-fed monopole antenna for 60 GHz ISM applications | K. Hettak ; Tyler Ross ; Adrian Momciu ; J.S. Wight ; R. James | 2013 | JS-B25HV | Hettak, K. & Ross, T. & James, R. & Momciu, Adrian & Wight, Jim. (2013). Flexible Polyethylene Terephthalate-based inkjet printed CPW-fed monopole antenna for 60 GHz ISM applications. European Microwave Week 2013, EuMW 2013 – Conference Proceedings; EuMC 2013: 43rd European Microwave Conference. 476-479. |
2012
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| A nonlinear energy harvester by direct printing technology | B.Andò, S.Baglio, M.Baù, A.R.Bulsara, V.Ferrari, M.Ferrari, G.L’Episcopo | 2012 | JS-B15P | B, Andò & Baglio, Salvo & Baù, Marco & Bulsara, A.R. & Ferrari, Vittorio & Ferrari, Marco & L’Episcopo, Gaetano. (2012). A Nonlinear Energy Harvester by Direct Printing Technology. Procedia Engineering. 47. -. 10.1016/j.proeng.2012.09.299. |
| The photonic curing process for printed electronics with applications to printed RFID tags and thin film transistors | Stan Farnsworth, Kurt Schroder, Bob Wenz, Dave Pope, Ian Rawson | 2012 | ICI-021 | Farnsworth, Stan & Schroder, K. & Wenz, B. & Pope, Devonte & Rawson, I.. (2012). The photonic curing process for printed electronics with applications to printed RFID tags and thin film transistors. International Conference on Digital Printing Technologies. 440-443. |
| Optimisation of silver paste for flexography printing on LTCC substrate | Rita Faddoul, Nadège Reverdy-Bruas, Anne Blayo, Thomas Haas, Christian Zeilman | 2012 | HPS-030 | Faddoul, Rita & Reverdy-Bruas, Nadège & Blayo, Anne & Haas, Thomas & Zeilmann, Christian. (2012). Optimisation of silver paste for flexography printing on LTCC substrate. Microelectronics Reliability. 52. 1483-1491. 10.1016/j.microrel.2012.03.004. |
| Invited Paper: Broad Implications Arising from Photonic Curing Process For Printed Electronics and Displays | Stan Farnsworth, Kurt Schroder , Bob Wenz , Dave Pope , Ian Rawson | 2012 | ICI-021 | Farnsworth, Stan & Schroder, Kurt & Wenz, Bob & Pope, Devonte & Rawson, Ian. (2012). 32.4: Invited Paper: Broad Implications Arising from Photonic Curing Process For Printed Electronics and Displays. SID Symposium Digest of Technical Papers. 43. 10.1002/j.2168-0159.2012.tb05808.x. |
| Fine line metallization of silicon solar cells via collimated aerosol beam direct write | Justin M. Hoey ; Douglas L. Schulz ; Jacob Fink | 2012 | JS-B25HV | Fink, Jacob & Hoey, Justin & Schulz, Doug. (2012). Fine Line Metallization of Silicon Solar Cells via Collimated Aerosol Beam Direct Write. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). 6. 10.1115/IMECE2012-86602. |
2011
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| Inkjet-printed highly transparent solar cell antennas | Jesus Arellano | 2011 | JS-B25P | Arellano, Jesus. (2011). Inkjet-Printed Highly Transparent Solar Cell Antennas. |
| Inkjet printing and low temperature sintering of CuO and CdS as functional electronic layers and Schottky diodes | Mahmut Kus, Nenad Marjanović, Jens Hammerschmidt, Jolke Perelaer, Stan Farnsworth, Ian Rawson, Esma Yenel, Serhad Tilki, Ulrich Schubert, Reinhard Baumann | 2011 | ICI-003 | Marjanovic, Nenad & Hammerschmidt, Jens & Perelaer, Jolke & Farnsworth, Stan & Rawson, Ian & Kus, Mahmut & Yenel, Esma & Tilki, Serhad & Schubert, Ulrich & Baumann, Reinhard. (2011). Inkjet printing and low temperature sintering of CuO and CdS as functional electronic layers and Schottky diodes. Journal of Materials Chemistry. 21. 13634-13639. 10.1039/c1jm11237f. |
| Metal-based inkjet inks for printed electronics | Alexander Kamyshny, Joachim Steinke, Shlomo Magdassi | 2011 | JS-011 | Kamyshny, Alexander & Steinke, Joachim & Magdassi, Shlomo. (2011). Metal-based Inkjet Inks for Printed Electronics. The Open Applied Physics Journal. 411. 19-36. 10.2174/1874183501104010019. |
| All inkjet printed system for strain measurement | Bruno Andò ; Salvatore Baglio ; Salvatore La Malfa ; Gaetano L’Episcopo | 2011 | JS-B15P | B. Andò, S. Baglio, S. La Malfa and G. L’Episcopo, “All inkjet printed system for strain measurement,” SENSORS, 2011 IEEE, Limerick, 2011, pp. 215-217, doi: 10.1109/ICSENS.2011.6127295. |
| Optically transparent multifunctional patch antennas integrated with solar cells for small satellites | Tursunjan Yasin | 2011 | JS-B35P | Yasin, T. (2011) Optically transparent multifunctional patch antennas integrated with solar cells for small satellites. |
2010
| Title | Author | Year | Ink mentioned | Journal Citation |
|---|---|---|---|---|
| Digital Fabrication of-Oxide Electronics | N. Marjanovic, J. Hammerschmidt, S. Farnsworth, I. Rawson, M. Kus, F. Ozel, S. Tllkl, R. R. Baumann | 2010 | ICI-003 | Marjanovlc, N. & Hammerschmidt, J. & Farnsworth, Stan & Rawson, I. & Kus, Mahmut & Ozel, F. & Tllkl, S. & Baumann, Reinhard. (2010). Digital fabrication of – Oxide electronics. International Conference on Digital Printing Technologies. 720-722. |
| Evaluation of PulseForge Tool for Processing Metallic Conductive Inks on Low Temperature Substrates Part II: Screen Inks | Stan Farnsworth, Ian Rawson, Kurt Schroder, Devonte Pope | 2010 | HPS-021, HPS-030 | Farnsworth, Stan & Rawson, I. & Schroder, K. & Pope, Devonte. (2010). Evaluation of PulseForge Tool for Processing Metallic Conductive Inks on Low Temperature Substrates Part II: Screen Inks. International Symposium on Microelectronics. 2010. 000920-000923. 10.4071/isom-2010-THA5-Paper2. |
| Inkjet printed patch antennas on transparent substrates | Tursunjan Yasin ; Reyhan Baktur | 2010 | JS-015 | T. Yasin and R. Baktur, “Inkjet printed patch antennas on transparent substrates,” 2010 IEEE Antennas and Propagation Society International Symposium, Toronto, ON, 2010, pp. 1-4, doi: 10.1109/APS.2010.5562275. |